OMG my hands are tingling

[Vampyre]

at 5.5 with the pc using edge blue with 2.5 one section my hands are tingling. is it suppose to vibrate that much?

[Beemerboy]

Yes its all apart of using a PC, mine do but that goes away shortly there after

[Big Leegr]

Yep. The PC "jiggles" or "Oscillates" rather than just spins, as a rotary buffer does, so there is more vibration. This is also why the PC is safer on paint for novices than a rotary. The PC also can move much faster than a "Waxmaster" type buffer, so there would be more "feedback" that way too.

You might want to try wearing gloves to help dampen the vibrations.

[Vampyre]

coo coo i can feal my hands lol.

good news is its taking out all my swrils bad news is is thats there is some REALLY bad etching from the water. >< med cutting with 2.5 and 2 passes got some of them but not all. i dont want to over do it.

[Beemerboy]

In a small area try some white vinegar to see if that will lift the water spots. It wonlt hurt the paint but just to see if it will dislove the hard water spots

[Vampyre]

its whats left of them spots. the white coloring is gone and the etching where the edges of the spot are still there.

i guess for the price i got the car i can really complain i got it for 500 below invoice. ^^

[Nickc0844]

Haha, wait until you use a rotary at 2000+rpms for an hour :D