Jcrawford
10-15-2003, 09:56 AM
say i have multiple layers of AIO/SG/S100 on my truck and after a wash i decide to clay bar it bc it feels rough. does it take any of the wax or sg off? do i need to re apply??
thanks, Joel
kg/cm²
10-15-2003, 10:30 AM
clay will remove the S100 and very likely the AIO/SG...when I clay, I always reapply my wax/sealant...
Accumulator
10-15-2003, 11:53 AM
I spot-clay my vehicles all the time WITHOUT needing to reapply my protection. You DO, however, need to do it *GENTLY*. Some of my vehicles only get (multiple layers of) SG every 8-12 months, but I spot-clay them with almost every wash. I DO NOT have a problem with clay removing my protection. Even with (regular) waxes, if it`s a good, fairly recent coat to begin with, the clay doesn`t do much to it if you`re careful.
You might want to put on another quick layer of S100, but your SG should be fine.
*If the roughness (that you`re claying to remove) is UNDER your protection, then THAT`S a whole `nother situation.*