1st time using a pc...

[fonseca_323i]

here are some pics of how it turned out. i used the pc for the very first time. i washed, BF polish with the white pad, then 2 coats of BF sealant with the gray pad. let me know what you think..



http://images3.fotki.com/v34/photos/8/87136/336983/frontangle-vi.jpg



http://images2.fotki.com/v11/photos/8/87136/336983/front-vi.jpg



http://images3.fotki.com/v31/photos/8/87136/336983/passside-vi.jpg



http://images2.fotki.com/v11/photos/8/87136/336983/reflection-vi.jpg

[imported_Simon]

Looks good :up

Good job!

[mlebarron]

Nice! :)



Did you have any issues with the BF on black with hazing or anything? I`ve seen some other threads with hazing issues, and I`m going to be using it on a black vehicle in the near future. My jeep is light colored so it wouldn`t really show up as much, and I haven`t had any hazing issues.

[fonseca_323i]

the car is actually navy blue. i have used BF 2 other times on this car and i have never had any issues with hazing or streaking. i applied the BF to the entire car then went back and wiped it off with a MF towel.

[mlebarron]

Did you wipe it off immediately after finishing putting it on? I`ve used it on my light colored Jeep and find it much easier to remove after waiting about an hour.

[Corey Bit Spank]

mle, You most likely won`t have a problem with a lighter car. Problems with streaking occur when it`s applied too thick, so it`s better to apply 2 coats thin (even if you wait a week between coats) than to apply one heavy coat.



That car looks nice. Like the wheels.

[fonseca_323i]

mle, i wiped it off right after i applied it to the entire car. i then applied the second coat the next day. i used a very very small amount of product. the thinner the better.