When should wool pad be used?

[Rednsxe]

Well i haven`t had a chance to use my wool pad yet, I know it is a pretty aggressive cutting pad with the Wool. When should i be looking into using the wool pad? Also what would be a better product to use the cutting pad with if it comes to those circumstances DACP or 3M Rubbing Coumpound? and what speed should i have the PC on when i use such combo?

[ultrajim49]

I have used the wool pad with succes

I was trying to remove dealer-swirls with a PC,yellow (megiuars)pad and 3M PIII Machine polish : that combo didn`t work

what did work was when I changed the yellow pad with the wool one! (speed 5800OPM)

Each situation will be diffrent,

so,

start with the least abrasive and step up `till you have the desired results

:wavey

Christiaan

[Accumulator]

*I* would use the wool with rubbing compound instead of with DACP. The DACP`s abrasives diminish, eventually becoming pretty mild. This, to me, conflicts with, and is somewhat nullified by, the inherantly aggressive nature of the wool pad. I use a constant-abrasive product with the wool pad, and quit as soon as I get a finish I can work further with the RC/yellow combo.