meGrimlock
06-26-2003, 10:15 AM
This is a picture of my wife`s Jetta. The Driver`s side rear door to be specific. Notice the Hologram Swirls that Caliber Collision so lovingly installed for me:
http://www.autopia.org/gallery/data/500/4601jetta_swirls-med.jpg
Now, would 3M FI-II Machine polish and a polishing pad do the trick for these? They are very light, and unless the light hits them just right the swirls are unnoticeable. It took me a while just to find a good angle to take the picture from to get them to show. I also have FCRC, but I think that may be a little too aggressive for this application. Remember that I am also removing the swirls from the hood of a Green Maxima that I posted previously. It looks like this weekend is going to be a crash course in swirl removal by PC.
http://www.autopia.org/gallery/data/500/4601jetta_swirls-med.jpg
Now, would 3M FI-II Machine polish and a polishing pad do the trick for these? They are very light, and unless the light hits them just right the swirls are unnoticeable. It took me a while just to find a good angle to take the picture from to get them to show. I also have FCRC, but I think that may be a little too aggressive for this application. Remember that I am also removing the swirls from the hood of a Green Maxima that I posted previously. It looks like this weekend is going to be a crash course in swirl removal by PC.