PDA

View Full Version : Autoglym super resin?



Ryan328is
05-14-2003, 07:42 AM
Hi,

Is Autoglym super resin polish abrasive enough to remove swirl marks?

I`m going to spend the weekend cleaning my car and I was thinking that, instead of using Scratch X, I was going to use the super resin to clean up the paintwork before the omega glaze and blitz wax.



Cheer`s:xyxthumbs

Ryan

Accumulator
05-14-2003, 09:19 AM
Ryan328is - In my experience, SRP is quite low-abrasive. It won`t remove swirl marks, so you`ll still need to use something with (mild) abrasives first. BTW, I DO really like the SRP :xyxthumbs

Paintxpert
05-14-2003, 09:50 AM
Super Resin doesnt even remove water spots!



I apply it just like a wax with minimum pressure.



You might have bonding issues with putting the glaze on top or before.

Lowejackson
05-14-2003, 10:46 AM
The resin is mild, but it is worth a try. You will need to apply a fair amount of pressure and then go over again using light pressure.



Steven

butchdave
05-14-2003, 11:43 AM
You can try their Paint Renovator - its more aggressive. Autoglym however reccomend a couple of tries first with SR.



Light swirls will come out, deeper ones will need the renovator

qdetail
05-14-2003, 12:29 PM
Hi Ryan....why not just use Special Touch to clean the paint? I assume you are using 1-Grand products based on your description of "omega" and "blitz"....I have had great results with the S.T.....Good Luck!....Gene