View Full Version : BFII on top of Klasse AIO?
bmwjorge22
05-07-2003, 06:26 PM
Can Blackfire II be used on top of Klasse AIO?
Jngrbrdman
05-07-2003, 07:13 PM
Yes it can. I`ve been topping AIO with Blackfire since Blackfire came out. AIO is a great base for sealants like that. :up
Spilchy
05-07-2003, 08:19 PM
Originally posted by Jngrbrdman
Yes it can. I`ve been topping AIO with Blackfire since Blackfire came out. AIO is a great base for sealants like that. :up
Funny, CMA says don`t do it. Also, my previous post about Black Fire here got the same response from all. However, CMA told me the exact opposite!
hondaguy2582
05-07-2003, 08:34 PM
i did it, and it still beads like crazy. http://www.autopia.org/forums/showthread.php?s=&threadid=21266
Jngrbrdman
05-07-2003, 08:46 PM
Well, if CMA wants to argue with me about the results I get from doing it this way then they are more than welcome to. They also say there are problems topping Klasse with Souveran and I`ve never seen that either. I trust results over directions generally. ;) I used two bottles of Blackfire with AIO as a base and I never had any problems with it.
bmwjorge22
05-07-2003, 09:10 PM
Thanks for the info. I can`t wait to see the results on my black car. How long should I wait after I apply the AIO before I can apply the BFII?
Jngrbrdman
05-07-2003, 09:12 PM
There isn`t a wait. You can go right after AIO.
Originally posted by Jngrbrdman
I trust results over directions generally. ;) Hmm, another Jngrbrdman quote in the making? ;)
I agree with that for sure. The Klasse/Souveran one is a good example, and I`ve had good luck using Klasse SG on a damp app, not the dry one they suggest.... Just goes to show - don`t believe everything you read. :)
Patrick
05-07-2003, 11:54 PM
ABSOLUTELY !
Makes a great combo.....Let BF set up before removal, course all dependant on temp and humidity IMO....Make sure it hazes, then give it another 1/2 hr or so.....