View Full Version : Quick Zaino question
mark2003
04-27-2003, 08:54 PM
How often should Z1 and Z2 be applied to your car? I live in B.C. so it rains quite a bit, but I don`t drive my car as much as most daily drivers (about 5000km a year)
Thanks
ultrajim49
04-28-2003, 01:59 AM
Originally posted by mark2003
How often should Z1 and Z2 be applied to your car? I live in B.C. so it rains quite a bit, but I don`t drive my car as much as most daily drivers (about 5000km a year)
Thanks
Theorethicly(sp???) Z1 should be used the very first time and after every 10 coats of Z(2or5).
Z2(or 5) lasts on MY car (Belgium, 200+ rainy days a year:sosad ) at least 6 months (daily driver).
You will see when Z is worn off mainly in the way water beads on your car.
Christiaan
mark2003
04-28-2003, 02:31 AM
So you only wax your car once every 6 months?
dbruene
04-28-2003, 03:28 AM
No. One can apply more often than every 6 months. Zaino is something that benefits from layering. Doing it corretly, the more coats layering on top of each other, the better your paint would look.
Aloha!
:wavey
mark2003
04-28-2003, 03:40 AM
I have done a search and have been reading up on how to apply zaino with ZFX but im a little confused on a few things.
It says not to apply more than 3 coats of Z in one day using ZFX. Does this mean I cannot do 3 coats of Z5 w/ZFX followed by 3 coats of Z2 w/ZFX in one day? My plan is this:
Dawn wash
claybar
Z7 wash
3 coats of Z5 w/ZFX to get rid of some minor swirls
3 coats of Z2 w/ZFX
Does this sound right or is something wrong there? Do you need to use Z6 after each coat of Z5 and Z2?
All these Z`s and numbers are confusing :nixweiss
Thanks
ultrajim49
04-28-2003, 04:03 AM
Does this mean I cannot do 3 coats of Z5 w/ZFX followed by 3 coats of Z2 w/ZFX in one day?
No, no more than 3 coats in a day:
Day 1 you put on 3 coats Z5-ZFX
Day 2 you put on 3 coats of Z2-ZFX
? Do you need to use Z6 after each coat of Z5 and Z2?
You don`t need to , but if you do it takes away (if there should be)unbuffed Z, + it makes the next application more easy, you can put on a thinner coat and it improves the shine.
The numbers:
I`m sure you checked www.zainobros.com?
and:http://www.autopia.org/forums/showthread.php?s=&threadid=14408
Happy detailing
:wavey :wavey
Christiaan
mark2003
04-28-2003, 04:08 AM
Ok sounds a lot more clearer now, thanks :up
Could I use Meguiars step 1 paint cleaner after the clay bar step to clean the paint better or would that affect anything?
ultrajim49
04-28-2003, 04:12 AM
Originally posted by mark2003
Ok sounds a lot more clearer now, thanks :up
Could I use Meguiars step 1 paint cleaner after the clay bar step to clean the paint better or would that affect anything?
after the clay and the wash the paint should be clean.
I haven`t used Megs step 1 cleaner, but as far as i know the Z-system I think it wouldn`t do any harm as long as your last step prior to Z is the Z wash.
Hope this helps
Christiaan
mark2003
04-28-2003, 04:16 AM
Alright looks like i`m all set to go, thank you very much