Stripping off wax

[dmarcus48]

Well this w/e was the first nice w/e in NJ in quite a while. Being fairly new to this forum and glazes in general. I used some Klasse SG on my new black Volvo, topped it off with a coat of P21S. Came out great but now I want to do more. What`s the best way to take the coat of P21S off so I can add more SG? Can I just apply the SG over the wax, or will the AIO do it for me?



TIA



Dave

[Richt]

Sg wont go over wax, you best bet is apply a coat or two of AIO and re SG.

[Thomasfl]

Question, just started using AIO after being a carnauba fanatic, does the AIO remove all the wax or just remove some while preparing the surface for the next step.

[hondaguy2582]

aio removes all of the wax

[2wheelsx2]

AIO cleans right down to bare paint, and lays down a thin lay of protection, so you should be all right if you AIO first.

[thevolvoguy]

You should AIO first, there might be bonding issues with SG, and Klasse is a very picky product, it must be done correctly or not at all.



I would dawn wash, 2x AIO then SG away. :xyxthumbs

[dmarcus48]

Thanks for the replies. AIO it is. Then several coats of SG.



Dave