PDA

View Full Version : Clogged windshield washer spray nozzels.



vroddad
08-28-2002, 11:38 PM
My w/s washer nozzels have become clogged with junk. The washer fluid sprays out at odd angles. How should I clear them?

imported_capspackle
08-29-2002, 01:04 AM
Take a small sewing (sp?) needle, and poke it through the little hole from the washer nozzle. Do that a couple times, and then with a can of compressed air, spray all the loosened dried wax away

Lemonxxs
08-29-2002, 09:25 AM
Inlieu of the needle find a very small thin wire like those used to tie tags on to objects...and insert it....be careful not to make the small hole larger or your squirting patter will change.....



If you use aire go back and make sure the hoses under the hood stay connected and have not slid loose...

Detailing NY
08-29-2002, 06:23 PM
I agree with all the above and thats all i have to say in this thread:D

Alan_525i
08-29-2002, 11:03 PM
Just as advice, a couple pieces of masking tape real small over the nozzles will prevent wax sling or crud from building up during detailing. Also, on may cars the little hoses that go to the nozzles get crimped or plugged. Check them too.