imported_carnut00
08-15-2002, 01:15 AM
Sorry if this question is redundant but I dawnd, claybared, and now ready to use use 3M SMR then P21S (for the first time) tomorrow. Please let me know which CMA pad to use..(or should I apply it by hand?). I am not 100% sure if P21s is abrasive.. or If i should use the grey/white pad. I will be topping with Zaino (applied by hand).
Thanks
any tips will be appreciated
chevyguy28
08-15-2002, 01:27 AM
You have two white pads and one yellow correct? What pads you use depends on how bad your swirls appear. Going with the advice to try the least aggressive method first, do a panel using the white pad with SMR. Then if that does not come out the way you expected, step up to the yellow pad. After that, use the P21S paint cleaner with the white pad. Be sure to dawn wash very thoroughly afterwards before Zaino. If you use SMR perfectly, you might get away without using the P21S, but chances you are going to need it. Good luck.