aggr3ssor
06-18-2002, 08:41 PM
HOw do I clean it?...like on aztecs and such...there covered in tar and dont know where to start.
BumpersPlus2
06-18-2002, 09:08 PM
Ive used a dilution of Simple Green and water, agitate with brush, kee;p the panels wet, rinse.
Lenny
06-18-2002, 09:39 PM
Originally posted by Bumpers Plus
Ive used a dilution of Simple Green and water, agitate with brush, kee;p the panels wet, rinse.
Afterward, use something like Mequiar`s #40 or Meguiar`s Gold Class Trim Detailer on it, let it soak for at least fifteen minutes, and then buff it off. Apply a second application, wait another fifteen minutes, and then buff off any excess. I found on my wife`s Escape that if I do this every two weeks, tar does stick as bad. Don`t get me wrong - the tar still gets on there, but it`s doesn`t seem to be as big a pain to get it off after treating the cladding like I described.
YoSteve
06-18-2002, 10:41 PM
WD40 works well on tar if I don`t have tar remover. Make sure to wash and dress afterwords. (I Klasse my plastic)