mixing product

[nabisco shine]

1 hey guy i will be working on a black cts can i use swirlremover (paint is in good conditon with minor swirls) no 7 show car glaze follow up with meg sealent 2.0 then follow up with the meg high tec yellow wax no26.

2 or use a dual action cleaner/polish then some p40 polish(chemical guys) then use the jet seal109 then follow up with petes53.

3 last swirl remover then show car glaze no7 then use jet seal109 then petes 53.
this will be for a small car show here in hawaii any advice would help its for a customer car thanks everyone:help:

[black bart]

Answer to Question #1 YES
#2 YES
#3 YES
Take your choice and see what you like all will work if done correctly.

[jtford95]

I agree with Bart, give all a try and see what you come up with. what do you have to loose.

[black bart]

If this is truly a show car then it is driven very little kept in a garage so why go to all the extra effort of using NXT then #26 just put on the NXT and leave it at that you will gain nothing in gloss by topping it with #26

I would use either the wax or a sealant not both.
Your technique will have far more to do with how it looks than how many coats of products you apply.