Premium Detailed - Garry Dean - Tampa, FL - 1993 Ford F150 Flare Side

[Garry Dean]

This is a 1993 Ford Flare side F150. It has been sitting in my clients’ yard for over 2 years. One day, about 2 months ago, I asked him if the truck ran and he told me it did when he parked it. He just didn’t need it anymore. That’s all he really said and so I began working on his daily driver that I was there to detail. Last month I was at his place again and before I left I taped a small spot off and got out my PC and some Megs m105 and polished to show him what kind of potential the truck had. He was blown away. Last week I was there again for a maintenance wash and to my surprise when I pulled up the truck was pulled out into the middle of the main section of the driveway with the hood up. He had gotten it running and installed a new battery. He told me to “go to town” with my buffer. This truck really turned out great. My client was very happy with the result (Even if he hadn’t told me a thousand times how happy he was, I sure figured it out when he wrote the check for $100 more than I asked him for). I really love working on single stage paint, especially when the end result is this dramatic. Here is the detail.

Exterior paint:
* ONR wash
* Taped off all trim with 3M tape
* Compounded with Makita rotary
* Major painted areas were compounded with Wolfgang TSR and LC 6.5” Orange CCS
* Smaller areas were hand compounded with Meguiars m105 and LC Orange hand pads
* All chrome trim and bumpers were hand polished with Optimum Metal Polish and LC Orange hand pads
* The entire vehicle was polished and sealed with Optimum Poli-seal with PCXP and 5.5” Green LC CCS pads
* Exterior windows were cleaned with Meguiars Glass Cleaner Concentrate

Wheels and tires:
* Wheels were cleaned with Muriatic acid due to extreme brake dust buildup
* Tires were cleaned with purple Power
* Wheels were polished with Optimum Metal Polish
* Tires were dressed with Meguiars Hyper Dressing

Befores

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2391.jpg

Can you tell where I did a test spot with ONR?

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2392.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2396.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2395.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2397.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2398.jpg

My test section and 50/50

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2403.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2407.jpg

Here are some while I was hard at work

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2412.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2413.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2414.jpg

Making some progress

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2418.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2419.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2420.jpg

All of the major sections were finished here. I was hand polishing at this point

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2548.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2551.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2554.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2555.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2556.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2557.jpg

These wheels were really gross. The before pic is of the wheels after I tried to clean them with every wheel cleaner known to mankind. I had to resort to the tough stuff, Muriatic acid.

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2558.jpg

After Muriatic acid and OPT Metal Polish

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2559.jpg

[Garry Dean]

Here is the rear bumper before and after OPT Metal Polish

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2563.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2564.jpg

Here are the afters, enjoy!

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2565.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2566.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2567.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2568.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2569.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2570.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2575.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2576.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2579.jpg

http://i482.photobucket.com/albums/rr189/rcracer81/IMG_2580.jpg

Thank you very much for looking!

[Morrison1]

Nice work looks great!!!

MORRISON`S MOBILE DETAILING

[Garry Dean]

Thank you!

[Beemerboy]

Nice work, I love working on SS paint, the results are always stunning...classic example of this

[Garry Dean]

Thank you, Sir!

[GearHead_1]

That`s great, you probably motivated him into turning yard furniture into a salable vehicle. Just out of curiosity, what was the interior like?

[Garry Dean]

That`s great, you probably motivated him into turning yard furniture into a salable vehicle. Just out of curiosity, what was the interior like?

The interior was pretty simple, but was also pretty nasty. He is a heavy smoker and had left old butts all over the interior. The windows had a layer of tar on them. I would imagine he will have it up for sale soon.

If I needed a truck I`d buy it now.

[tuscarora dave]

Very nice turnaround, the truck looks great! I bet you had fun cleaning all those pads up afterwards.:bigups

[mrclean81]

Awsome turnaround. That ended up being a hell of a nice truck

[Stephan]

Fantastic turn around...looks amazing!

[Garry Dean]

Thank you all for looking. I am glad you appreciate my work.

[sullysdetailing]

Great Job. I would of bought the truck when the paint was faded for cheap get it to run, buff it out, resell and make some $$$$ lol

Dont you love Opti Metal Polish. I got to try it out on the FX I did. The wheels where trashed and it did a great job bringing the paint back.

[mc2hill]

Nice turnaround Garry! I would have thought that was a repaint if I didn`t know any better. :bigups

Did you use the pad cleaner when you finished that truck?

[Garry Dean]

Nice turnaround Garry! I would have thought that was a repaint if I didn`t know any better. :bigups

Did you use the pad cleaner when you finished that truck?

Nope, still haven`t used that pad washer, lol. Thanks Mike.

Thanks Shawn, I actually did ask him if he would sell it to me before I showed him what kind of potential it had. Obviously, the answer was no.