Mike Phillips
02-08-2010, 10:38 AM
Pro Blend Bottle Proportioners - Accurately Measure Concentrates (http://www.autopiaforums.com/forums/autogeek-net-sponsored-forum/28330-pro-blend-bottle-proportioners-accurately-measure-concentrates.html)
If you purchase your detailing supplies in bulk concentrates, then here`s very handy tool to have around, it`s called the Pro Blend Bottle Proportioner.
Order the Pro Blend Bottle Proportioners on Autogeek.net (http://www.autogeek.net/problboprco.html)
Assembly
The Pro Blend Bottle Proportioners come sealed in plastic bags to keep them clean and free from contaminants, so the first thing to do is to remove each Proportioner from it`s plastic bag.
http://www.autogeekonline.net/gallery/data/719/ProBlend015.jpg
Next you`ll want to trial-fit the Proportioner to the specific product bottle or jug you`ll be pairing to the Proportioner. The Pro Blend Bottle Proportioners come with Universal Fit Suction Tube which you`ll need to measure and cut to fit your specific application.
Place the suction tube into the bottle until it bottoms out and then measure or guesstimate the amount of tube you`ll need to cut so that the Pro Blend Bottle Proportioner can be attached to the bottle without placing any bind on the attaching lid.
http://www.autogeekonline.net/gallery/data/719/ProBlend016.jpg
Error on the side of caution when making your cut because if after you cut the tube it`s still just a little too long you can always trim it to fit.
http://www.autogeekonline.net/gallery/data/719/ProBlend017.jpg
After making your final cut, place the suction tube into the bottle.
http://www.autogeekonline.net/gallery/data/719/ProBlend018.jpg
Next, tighten the attaching lid to the threads on the opening of the bottle or jug. Tighten till firm but don`t over-tighten and be sure not to cross-thread the lid onto the bottle.
http://www.autogeekonline.net/gallery/data/719/ProBlend019.jpg
Your Pro Blend Bottle Proportion is ready for use!
http://www.autogeekonline.net/gallery/data/719/ProBlend020.jpg
How to use the Pro Blend Bottle Proportioner
To measure an accurate volume of product you turn the large black plastic cap on the top of the reservoir either clockwise or counterclockwise to raise or lower the internal regulator to the desired amount. Then squeeze the bottle to inject the reservoir with product until the product covers over the top of the regulator. Remove the small black plastic cap and the concentrate can now be poured into your secondary container.
The Pro Blend Bottle Proportioner has a see-through reservoir which makes it easy to see the fill level.
http://www.autogeekonline.net/gallery/data/719/ProBlend001.jpg
Each Pro Blend Bottle Proportioner comes with an adjustable internal regulator.
http://www.autogeekonline.net/gallery/data/719/ProBlend002.jpg
Simply twist the top lid while holding the reservoir firmly to raise or lower the regulator to the preferred volume desired. The scale reads in both ounces and milliliters.
http://www.autogeekonline.net/gallery/data/719/ProBlend021.jpg
Next squeeze the side of the bottle or jug to fill the reservoir to the desired fill level.
http://www.autogeekonline.net/gallery/data/719/ProBlend003.jpg
As you squeeze you`ll see the concentrate spill over the top of the regulator to fill the reservoir.
http://www.autogeekonline.net/gallery/data/719/ProBlend004.jpg
http://www.autogeekonline.net/gallery/data/719/ProBlend005.jpg
After filling lift off the small plastic cap off the spout.
http://www.autogeekonline.net/gallery/data/719/ProBlend008.jpg
You`re ready to pour off into your secondary bottle!
http://www.autogeekonline.net/gallery/data/719/ProBlend006.jpg
Easy pour, no spill flip-top spout
http://www.autogeekonline.net/gallery/data/719/ProBlend009.jpg
The Pro Blend Bottle Proportioner makes measuring the correct amount fast, easy and most important... accurate. http://www.autogeekonline.net/gallery/data/719/ProBlend010.jpg
Plus there`s no messy measuring cup, which has to be rinsed and stored in a clean place to prevent contamination. The small plastic cap on the top of the Pro Blend Bottle Proportion keeps the inside of the unit contamination-free
http://www.autogeekonline.net/gallery/data/719/ProBlend011.jpg
Here`s a 32 ounce spray bottle of DP Rinseless Wash & Gloss read to go!
http://www.autogeekonline.net/gallery/data/719/ProBlend012.jpg
On the www.Autogeek.net (http://www.autogeek.net/) store
The Pro Blend Proportioner comes in two sizes, one for quarts and one for gallons, you can purchase them individually or in a Combo-Kit with one of each.
Pro Blend Proportioner Combo Kit - One each for quart size and one for gallon size containers (http://www.autogeek.net/problboprco.html)
Pro Blend Bottle Proportioner 32 ounce size (http://www.autogeek.net/problbopr32o.html)
Pro Blend Bottle Proportioner 1 gallon size (http://www.autogeek.net/bottle-proportioners.html) (128 ounces)
DP Final Gloss™ Quick Detailer - 32 ounces (http://www.autogeek.net/dp-final-gloss-detailer.html)
DP Final Gloss™ Quick Detailer - 1 gallon (http://www.autogeek.net/dp-final-gloss-gallon.html)
32 oz. Autogeek Heavy Duty PVC Clear Spray Bottle (http://www.autogeek.net/autogeek-clear-sprayer.html)
SprayMaster Trigger Sprayer Lifetime Warranty (http://www.autogeek.net/spraymaster-trigger.html)
http://www.autogeekonline.net/forum/images/smilies/smile.gif
If you purchase your detailing supplies in bulk concentrates, then here`s very handy tool to have around, it`s called the Pro Blend Bottle Proportioner.
Order the Pro Blend Bottle Proportioners on Autogeek.net (http://www.autogeek.net/problboprco.html)
Assembly
The Pro Blend Bottle Proportioners come sealed in plastic bags to keep them clean and free from contaminants, so the first thing to do is to remove each Proportioner from it`s plastic bag.
http://www.autogeekonline.net/gallery/data/719/ProBlend015.jpg
Next you`ll want to trial-fit the Proportioner to the specific product bottle or jug you`ll be pairing to the Proportioner. The Pro Blend Bottle Proportioners come with Universal Fit Suction Tube which you`ll need to measure and cut to fit your specific application.
Place the suction tube into the bottle until it bottoms out and then measure or guesstimate the amount of tube you`ll need to cut so that the Pro Blend Bottle Proportioner can be attached to the bottle without placing any bind on the attaching lid.
http://www.autogeekonline.net/gallery/data/719/ProBlend016.jpg
Error on the side of caution when making your cut because if after you cut the tube it`s still just a little too long you can always trim it to fit.
http://www.autogeekonline.net/gallery/data/719/ProBlend017.jpg
After making your final cut, place the suction tube into the bottle.
http://www.autogeekonline.net/gallery/data/719/ProBlend018.jpg
Next, tighten the attaching lid to the threads on the opening of the bottle or jug. Tighten till firm but don`t over-tighten and be sure not to cross-thread the lid onto the bottle.
http://www.autogeekonline.net/gallery/data/719/ProBlend019.jpg
Your Pro Blend Bottle Proportion is ready for use!
http://www.autogeekonline.net/gallery/data/719/ProBlend020.jpg
How to use the Pro Blend Bottle Proportioner
To measure an accurate volume of product you turn the large black plastic cap on the top of the reservoir either clockwise or counterclockwise to raise or lower the internal regulator to the desired amount. Then squeeze the bottle to inject the reservoir with product until the product covers over the top of the regulator. Remove the small black plastic cap and the concentrate can now be poured into your secondary container.
The Pro Blend Bottle Proportioner has a see-through reservoir which makes it easy to see the fill level.
http://www.autogeekonline.net/gallery/data/719/ProBlend001.jpg
Each Pro Blend Bottle Proportioner comes with an adjustable internal regulator.
http://www.autogeekonline.net/gallery/data/719/ProBlend002.jpg
Simply twist the top lid while holding the reservoir firmly to raise or lower the regulator to the preferred volume desired. The scale reads in both ounces and milliliters.
http://www.autogeekonline.net/gallery/data/719/ProBlend021.jpg
Next squeeze the side of the bottle or jug to fill the reservoir to the desired fill level.
http://www.autogeekonline.net/gallery/data/719/ProBlend003.jpg
As you squeeze you`ll see the concentrate spill over the top of the regulator to fill the reservoir.
http://www.autogeekonline.net/gallery/data/719/ProBlend004.jpg
http://www.autogeekonline.net/gallery/data/719/ProBlend005.jpg
After filling lift off the small plastic cap off the spout.
http://www.autogeekonline.net/gallery/data/719/ProBlend008.jpg
You`re ready to pour off into your secondary bottle!
http://www.autogeekonline.net/gallery/data/719/ProBlend006.jpg
Easy pour, no spill flip-top spout
http://www.autogeekonline.net/gallery/data/719/ProBlend009.jpg
The Pro Blend Bottle Proportioner makes measuring the correct amount fast, easy and most important... accurate. http://www.autogeekonline.net/gallery/data/719/ProBlend010.jpg
Plus there`s no messy measuring cup, which has to be rinsed and stored in a clean place to prevent contamination. The small plastic cap on the top of the Pro Blend Bottle Proportion keeps the inside of the unit contamination-free
http://www.autogeekonline.net/gallery/data/719/ProBlend011.jpg
Here`s a 32 ounce spray bottle of DP Rinseless Wash & Gloss read to go!
http://www.autogeekonline.net/gallery/data/719/ProBlend012.jpg
On the www.Autogeek.net (http://www.autogeek.net/) store
The Pro Blend Proportioner comes in two sizes, one for quarts and one for gallons, you can purchase them individually or in a Combo-Kit with one of each.
Pro Blend Proportioner Combo Kit - One each for quart size and one for gallon size containers (http://www.autogeek.net/problboprco.html)
Pro Blend Bottle Proportioner 32 ounce size (http://www.autogeek.net/problbopr32o.html)
Pro Blend Bottle Proportioner 1 gallon size (http://www.autogeek.net/bottle-proportioners.html) (128 ounces)
DP Final Gloss™ Quick Detailer - 32 ounces (http://www.autogeek.net/dp-final-gloss-detailer.html)
DP Final Gloss™ Quick Detailer - 1 gallon (http://www.autogeek.net/dp-final-gloss-gallon.html)
32 oz. Autogeek Heavy Duty PVC Clear Spray Bottle (http://www.autogeek.net/autogeek-clear-sprayer.html)
SprayMaster Trigger Sprayer Lifetime Warranty (http://www.autogeek.net/spraymaster-trigger.html)
http://www.autogeekonline.net/forum/images/smilies/smile.gif