View Full Version : Porter Cable
outlander
01-13-2009, 07:04 PM
Hi Guys. I have a 2007 black Mitsubishi Outlander. The paint is in great shape except for a few swirl marks. I received a Porter Cable for Xamas with some pads and I;am considering purchasing Wolfgand Products to remove the swirls. What do you guys think?
Beemerboy
01-13-2009, 07:12 PM
Hi Guys. I have a 2007 black Mitsubishi Outlander. The paint is in great shape except for a few swirl marks. I received a Porter Cable for Xamas with some pads and I;am considering purchasing Wolfgand Products to remove the swirls. What do you guys think?
Excellent choice!
The total swirl remover is very good...and the high glass sealant is one of my favs
Check Troys site for it!
Troy@Protekt
01-13-2009, 07:14 PM
Check Troys site for it!
LOL. :yourrock
jaybs02
01-13-2009, 07:15 PM
I have tried the Wolfgang and wasn`t too impressed.
I have had luck with Poorboys, Meguiars and Optimum.
The key more to what what product line is the correct level of abrasiveness of the polish and the pads.
Start with the least aggressive combination first.
If this is your first time with a PC you may want to take your time, even though it is fairly easy there is a bit of a learning curve.
I`m sure your black outlander will come out looking great, hope to see some pics.
Troy@Protekt
01-13-2009, 07:15 PM
Hi Guys. I have a 2007 black Mitsubishi Outlander. The paint is in great shape except for a few swirl marks. I received a Porter Cable for Xamas with some pads and I;am considering purchasing Wolfgand Products to remove the swirls. What do you guys think?
You can`t go wrong with Wolfgang. they have some of the best polishes and sealants out there.
Troy@Protekt
01-13-2009, 07:17 PM
I have tried the Wolfgang and wasn`t too impressed.
What didn`t you like?
Beemerboy
01-13-2009, 07:20 PM
You can`t go wrong with Wolfgang. they have some of the best polishes and sealants out there.
Its my understanding that they are made by Menzerna..or affiliated some how...and that`s some pretty high end stuff.
jaybs02
01-13-2009, 08:05 PM
What didn`t you like?
Tried their SMR and just wasn`t getting the results I was looking for, I felt it wasn`t cutting enough and my marring was light. Granted it was some time back when it was first introduced so the formula may have changed, or it could have been user error :notme:
Not to say that I may not revisit it again at a later time, I always look to give things a fair shake :D