Slight Cloudiness after polish

[G.T.Subie]

So I get a slight cloudy look after I polish car. I am just not too sure what I`m doing wrong.

From what I have read most of it seems to come from mixing products but I can see this right after I polish with PB 2 and a light pad.

Do I need to go with PB1 or could it be my technique.

[budman3]

It sounds like you didn`t fully break down the polish (didn`t work it in long enough) and are leaving micromarring behind. What pad were you using? It could also be micromarring from using an aggressive pad. SSR1 or SSR2 with a polishing or finishing pad will likely take care of your problem.

[G.T.Subie]

Must be me :lol:

I guess I need to break it down more and take my time because I was using a white pad with the SSR2.

Thanks for the help

[JaredPointer]

Follow up with a finer pad & polish combo. Sounds like you`re almost there, just not quite getting the last step in.

[G.T.Subie]

so step up to the finishig pad with something like ssr1?

[Poorboy]

so step up to the finishig pad with something like ssr1?

yes, ;) remember that the speed of your PC should be at least 5 when working with the SSR`s :)