Got some aluminum rims that need something

[PDoyle]

https://www.autopia.org/forums/attachment.php?attachmentid=38007&stc=1https://www.autopia.org/forums/attachment.php?attachmentid=38008&stc=1https://www.autopia.org/forums/attachment.php?attachmentid=38009&stc=1I`ve had these aluminum rims for around 20 years. I must have used some type of cleaner that it didn`t agree with at some point. Has anyone seen this peeling around the ring before and how can I get rid of this?

[Ron Ketcham]

Original factory clear is toast. Remove this, polish with an aluminum polish and coat with a good paste wax,

[PDoyle]

Ok so it is a clear coat. Thanks much. How would you remove that?

[PoisonTheWell]

Ok so it is a clear coat. Thanks much. How would you remove that?

I wet sanded mine. Just enough grit to remove the clearcoat. Then worked my way up in grit to polish.

[salty]

0000 steel wool and Super Wrap spray them.

[PDoyle]

I wet sanded mine. Just enough grit to remove the clearcoat. Then worked my way up in grit to polish.

Thanks I might try some 1200 grit to Mothers aluminum polish.

[PDoyle]

0000 steel wool and Super Wrap spray them.
I think the wrap is a great idea, thanks.

[Setec Astronomy]

...and Super Wrap spray them.

What is that, the Gen Z version of Plasti-Dip?

[Stokdgs]

What is that, the Gen Z version of Plasti-Dip?

Yes, it appears to be just that...And it lasts 2 years ! Super Wrap Spray on Amazon...
Dan F

[salty]

Ya check them out, much cheaper in Canada than plasti-dip. https://getsuperwrap.com (https://getsuperwrap.com/)