View Full Version : Looking for products to protect my wheels
Dear all,
I have been away from detailing scene for a while, and I realized there are a lot new products on the market.
I`m now looking for a product that would help to protect my wheels.
I plan to jack up the car, take the wheels off, thorough cleaning, apply the protection.
The wheels in question are:
1. factory painted Mercedes-Benz wheels
2. factory polished Subaru wheels
3. aftermarket Enkei alloy wheels
https://st.motortrend.com/uploads/sites/10/2015/11/2012-mercedes-benz-cls-class-cls550-sedan-angular-front.png
https://st.motortrend.com/uploads/sites/10/2017/07/2018-subaru-forester-limited-suv-angular-front.png
http://enkei.com/wp-content/uploads/2015/01/RPF1_Gold.jpg
I believe the 2 factory wheels are tough, but the Enkei one is more delicate aluminum wheels.
I was thinking to buy McKees 37 wheel coating, or just stick with a good paste wax like Collinite 476 885 or Soft99 Fusso Coat?
I cant find any details on whether these products are compatible with alum wheels or not.
So any tips or experience sharing will be appreciated!
The Guz
10-02-2018, 01:24 AM
Any wheel coating will work to give you that longer protection. Factory wheels are clear coated. You will have to find out if those enkei`s are clear coated or not.
briarpatch
10-02-2018, 06:22 AM
McKees Wheel Coating....you may thank me later
The Driver
10-02-2018, 06:32 AM
I would just use Hydro2 every other wash, much easier and stronger than wax. Wheel coatings are nice but take way to much time and probably need more refreshing than what they advertise.
someidiot
10-02-2018, 07:09 AM
I used McKee`s wheel coating and then would touch it up with Hydro Blue every once in a while. I`m not sure if there is a more durable option out there than McKee`s, but it sure was a lot of work for not a very long duration.
RaydiantDetail
10-02-2018, 01:22 PM
I like to use Gyeon Wet Coat or CarPro Hydro2 which are spray on/ rinse off protection products. They should work on all types of rim finishes. I have used them on clear coated, powder coated, chrome plated etc. without any issue.
If I am doing a full wheels off cleaning and coating then I will coat with something like Gyeon Rim or Cquartz Dlux then maintain with Gyeon WetCoat or CarPro Hydro2 every month.
Polish Angel Super Sport is also a nice option for a wheel coating and is in between a full on wheel coating and a spray/rinse product. I have seen 4 months or so of durability before it started to fade on my DD from my testing and that was without any maintenance spray or reapplication. Depending on how much you drive your car you could get the full 6 months or more. this is a PTFE based product too with titanium dioxide and just adds a nice look to wheels as well.
If you are going to do a wheels off and going through the process of cleaning and prepping the wheels as mentioned then definitely look into a specific wheel coating as mentioned. Top up with something like PA Super Sport every few months. You should have great results.
BudgetPlan1
10-02-2018, 01:48 PM
I`d never go without a wheel coating again. Single biggest time saver for me during a wash. Does take a bit of time to prep/coat wheels but once done, ease of maintenance far exceeds initial labor. 14 months, 24k miles in NE Ohio and coating is still holding up well. Recently started occasional application of PA SuperSport, more for the interesting look it lends to the non-painted, clear-coated bare aluminum sections of wheel as opposed to protection.
acuRAS82
10-02-2018, 01:48 PM
I used McKee`s wheel coating and then would touch it up with Hydro Blue every once in a while. I`m not sure if there is a more durable option out there than McKee`s, but it sure was a lot of work for not a very long duration.
I’ve only coated wheels a few times, so just making sure I prepped correctly. I used wheel cleaner, finishing polish, then 3 quick wipe downs with Prep Spray then coated. The other set so only cleaned and used Prep polish and coated. Wasn’t too, too bad. Are these the only steps?
rlmccarty2000
10-02-2018, 11:38 PM
Go with McKees Wheel Coating. You should get 1 year of durability. Just wash with soap and water, no wheel cleaners.
The Driver
10-03-2018, 07:38 AM
That`s my problem with these wheel coatings, I`m using a dedicated wheel cleaner. I`m not spending more time to scrub than I have to, it really makes no sense to coat wheels other than maybe looks or if you have carbon ceramics (Your just using soap an water only anyways).
Coat wheels = you ca`t use a dedicated wheel cleaner like sonax which cuts time an thus more scrubbing is required.
No coat = less scrubbing, more effective wheel cleaner (Potentially more expensive though) an use hydro2 or another water based sealant.
RaydiantDetail
10-03-2018, 07:56 AM
That`s my problem with these wheel coatings, I`m using a dedicated wheel cleaner. I`m not spending more time to scrub than I have to, it really makes no sense to coat wheels other than maybe looks or if you have carbon ceramics (Your just using soap an water only anyways).
Coat wheels = you ca`t use a dedicated wheel cleaner like sonax which cuts time an thus more scrubbing is required.
No coat = less scrubbing, more effective wheel cleaner (Potentially more expensive though) an use hydro2 or another water based sealant.The purpose of the wheel coating is that you dont have to spend time scrubbing or using powerful wheel cleaners. However most of these wheel cleaning products like sonax wheel cleaner plus are Ph neutral so they aren`t really going to cause any issue if you want to continue to use them on coated wheels though with mine soap and water and a pressure washer often gets them pretty clean without any scrubbing on the faces. Usually the barrels just need a quick wheel woolie scrub.
Sent from my SM-G965U using Tapatalk
rlmccarty2000
10-03-2018, 08:35 AM
The purpose of the wheel coating is that you dont have to spend time scrubbing or using powerful wheel cleaners. However most of these wheel cleaning products like sonax wheel cleaner plus are Ph neutral so they aren`t really going to cause any issue if you want to continue to use them on coated wheels though with mine soap and water and a pressure washer often gets them pretty clean without any scrubbing on the faces. Usually the barrels just need a quick wheel woolie scrub.
Sent from my SM-G965U using Tapatalk
Amen. With coated wheels you save money by NOT having to use an expensive wheel cleaner. Most of the time my pressure washer get the wheels clean without scrubbing and I’ve got BMW brake dust.
Justins00ss
10-03-2018, 08:39 AM
IGL wheel coating works wonders and if you feel the need to use a wheel cleaner Mckees foaming wheel cleaner gel is safe on that coating. But I have found that with regular maintenance on coated wheels the need for a strong cleaner isn`t really necessary.
DetailZeus
10-03-2018, 09:10 AM
I understand you shouldn`t *need* to use a dedicated wheel cleaner on a coated wheel but I`d hope a wheel coating would be chemically resistant enough to stand up to any autopian-grade wheel cleaner you`d throw at it. Think after a long winter and you want a little chemical help bringing them back to life. Though if shampoo + wheel woolies is enough to revive a filthy but coated wheel then I might be sold...
RaydiantDetail
10-03-2018, 09:43 AM
Amen. With coated wheels you save money by NOT having to use an expensive wheel cleaner. Most of the time my pressure washer get the wheels clean without scrubbing and I’ve got BMW brake dust.
Oh yeah me too. BMW brake dust. Its some of the worst!
When I swicth out my pads ill probably get some EBC pads.