Joe Metlow
08-02-2017, 08:27 AM
Saving Time
When I say I use 914 alot, That word is a huge understatement to how much I actually use N914, Throughout the course of a detail, I seriously use N914 though out every process, From the washing/decon stages, to doing the interior, Even when I am polishing, N914 is something that I constantly use.
Going through multiple bottles after 1 detail is very common for me. So the need to constantly having to mix-up and re-fill my panel wipe ratio bottle, and waterless wash bottle. So I found a easy way to dispense N914 so I can re-fill with ease.
N914 Dispenser
You might be thinking "Joe, that looks like a shampoo bottle!" Well you are correct!
I found this empty shampoo bottle in my house, and A light-bulb went off.
I first THOROUGHLY cleaned and rinsed the bottle out, After I added a few drops of dish soap to make sure any remaining solution is gone out of the bottle, I also filled the bottle up the water and pumped the sprayer to bleed out the dispenser.
I carefully peeled the old sticker off, and slapped a McKee`s 37 Sticker on it! Just to make it look more official :D
Alright, Let`s see how this thing works!
https://www.autogeekonline.net/gallery/data/3505/medium/1290.JPG
I like these bottles because they have measurements on the back, (I dont like math) I need to re-fill my Panel Wipe bottle the dilution ratio is 1:8, So I just pumped till I got to the proper 1:8 Line.
https://www.autogeekonline.net/gallery/data/3505/medium/2206.JPG
Easy Peasy, now just fill with water.
https://www.autogeekonline.net/gallery/data/3505/medium/898.jpg
I measured to see how much 1 pump dispenses, It pumps approximately 0.25oz, So all I need to make some waterless wash/clay lube is 1 pump in my 32oz bottle. (makes life easy)
https://www.autogeekonline.net/gallery/data/3505/medium/3179.JPG
I always keep my dispenser bottle on my work bench, So I can always pump-n-go!
https://www.autogeekonline.net/gallery/data/3505/medium/4153.JPG
It`s not just good for filling your bottles! I also use it to dispense into my rinseless buckets.
N914 for a rinseless wash is 1:256, So if you are using 2 gal of water, I would pump 4 times, 4 gal of water I would pump 8 times.
This actually saves me from using excess product. You do not have to fill measuring caps and lose product, Or use the Glug-Glug method and use too much!
https://www.autogeekonline.net/gallery/data/3505/medium/6108.JPG
Ready to rock.
https://www.autogeekonline.net/gallery/data/3505/medium/790.JPG
https://www.autogeekonline.net/gallery/data/3505/medium/5124.JPG
This Dispenser bottle is awesome! I have not had any issues with leaking, I even take it along for mobile jobs. It has made my detailing go alot smoother and more efficient.
Now, If I encouraged you to spill your 90% full Shampoo bottle, I take no liability for your wife yelling at you!
- Joe Metlow
Next Level Auto Detail
When I say I use 914 alot, That word is a huge understatement to how much I actually use N914, Throughout the course of a detail, I seriously use N914 though out every process, From the washing/decon stages, to doing the interior, Even when I am polishing, N914 is something that I constantly use.
Going through multiple bottles after 1 detail is very common for me. So the need to constantly having to mix-up and re-fill my panel wipe ratio bottle, and waterless wash bottle. So I found a easy way to dispense N914 so I can re-fill with ease.
N914 Dispenser
You might be thinking "Joe, that looks like a shampoo bottle!" Well you are correct!
I found this empty shampoo bottle in my house, and A light-bulb went off.
I first THOROUGHLY cleaned and rinsed the bottle out, After I added a few drops of dish soap to make sure any remaining solution is gone out of the bottle, I also filled the bottle up the water and pumped the sprayer to bleed out the dispenser.
I carefully peeled the old sticker off, and slapped a McKee`s 37 Sticker on it! Just to make it look more official :D
Alright, Let`s see how this thing works!
https://www.autogeekonline.net/gallery/data/3505/medium/1290.JPG
I like these bottles because they have measurements on the back, (I dont like math) I need to re-fill my Panel Wipe bottle the dilution ratio is 1:8, So I just pumped till I got to the proper 1:8 Line.
https://www.autogeekonline.net/gallery/data/3505/medium/2206.JPG
Easy Peasy, now just fill with water.
https://www.autogeekonline.net/gallery/data/3505/medium/898.jpg
I measured to see how much 1 pump dispenses, It pumps approximately 0.25oz, So all I need to make some waterless wash/clay lube is 1 pump in my 32oz bottle. (makes life easy)
https://www.autogeekonline.net/gallery/data/3505/medium/3179.JPG
I always keep my dispenser bottle on my work bench, So I can always pump-n-go!
https://www.autogeekonline.net/gallery/data/3505/medium/4153.JPG
It`s not just good for filling your bottles! I also use it to dispense into my rinseless buckets.
N914 for a rinseless wash is 1:256, So if you are using 2 gal of water, I would pump 4 times, 4 gal of water I would pump 8 times.
This actually saves me from using excess product. You do not have to fill measuring caps and lose product, Or use the Glug-Glug method and use too much!
https://www.autogeekonline.net/gallery/data/3505/medium/6108.JPG
Ready to rock.
https://www.autogeekonline.net/gallery/data/3505/medium/790.JPG
https://www.autogeekonline.net/gallery/data/3505/medium/5124.JPG
This Dispenser bottle is awesome! I have not had any issues with leaking, I even take it along for mobile jobs. It has made my detailing go alot smoother and more efficient.
Now, If I encouraged you to spill your 90% full Shampoo bottle, I take no liability for your wife yelling at you!
- Joe Metlow
Next Level Auto Detail