Marknett
02-15-2017, 05:50 AM
Full Treatmant Day
Vehicle; 2016 Toyota Tacoma Black (personal vehicle)
Porter Cable 7424 XP
Lake Shore Pads 5 1/2" Orange , white and Black, Eagle Edgeless rags 16 x16
Products ; Wolfgang Uber Rinseless wash , Iron X , Nanoskin medium prep sponge ,Wolfgang 3.0 swirl remover , Poorboy`s Black Hole Glaze , Collonite 845
Weather Conditions ; Overcast and 65 degrees
Previous finish on Truck; excellent shape but a few light swirls
First a good rinse and wipe down with the Uber. Then a healthy spray of the Iron x on wheels and paint. After waiting a good 5 or 10 minutes, there was no fall out on the paint but a little on the wheels. After a good rinse, I used the Nanoskin instead of clay using my uber mixed in a spray bottle as a lubricant. I had to break in the Nanoskin sponge on the windshield since it was new. I found you need a lot of lubrication with the Nano pad but it seemed to do a good job .Once this was completed, I did a final rinse and then blow dried with my electric leaf blower. Now the fun part begins, First I tried all the products in one square on the roof of the truck to test results. Looked great so here we go. First ,I hit any light swirls with the orange pad and the Wolfgang 3.0 . There were only 3 . Buff that off and the finish looks great. Now switch to the white pads and load it up with the Poorboys Black Hole Glaze . I used this working one section at a time and then removing with one rag and buffing with another. It looks amazing !!!
Once the whole truck was completed, Time for another full buff. Then to cap it all off, I applied a coat of Collinite 845 . I put this on using a black pad and removed by hand. Once completed , Another final buffing. Then, Stand back and admire the shine http://www.autogeekonline.net/forum/images/smilies/smile.png
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133330264_zpsnviuvvfy.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133330264_zpsnviuvvfy.jpg.html)
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133356185_zps4zxcliko.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133356185_zps4zxcliko.jpg.html)
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133225300_HDR_zpsiyj62cfv.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133225300_HDR_zpsiyj62cfv.jpg.html)
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133238122_zpsd6runt9i.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133238122_zpsd6runt9i.jpg.html)
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133303034_zpsdbqykvk0.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133303034_zpsdbqykvk0.jpg.html)
Vehicle; 2016 Toyota Tacoma Black (personal vehicle)
Porter Cable 7424 XP
Lake Shore Pads 5 1/2" Orange , white and Black, Eagle Edgeless rags 16 x16
Products ; Wolfgang Uber Rinseless wash , Iron X , Nanoskin medium prep sponge ,Wolfgang 3.0 swirl remover , Poorboy`s Black Hole Glaze , Collonite 845
Weather Conditions ; Overcast and 65 degrees
Previous finish on Truck; excellent shape but a few light swirls
First a good rinse and wipe down with the Uber. Then a healthy spray of the Iron x on wheels and paint. After waiting a good 5 or 10 minutes, there was no fall out on the paint but a little on the wheels. After a good rinse, I used the Nanoskin instead of clay using my uber mixed in a spray bottle as a lubricant. I had to break in the Nanoskin sponge on the windshield since it was new. I found you need a lot of lubrication with the Nano pad but it seemed to do a good job .Once this was completed, I did a final rinse and then blow dried with my electric leaf blower. Now the fun part begins, First I tried all the products in one square on the roof of the truck to test results. Looked great so here we go. First ,I hit any light swirls with the orange pad and the Wolfgang 3.0 . There were only 3 . Buff that off and the finish looks great. Now switch to the white pads and load it up with the Poorboys Black Hole Glaze . I used this working one section at a time and then removing with one rag and buffing with another. It looks amazing !!!
Once the whole truck was completed, Time for another full buff. Then to cap it all off, I applied a coat of Collinite 845 . I put this on using a black pad and removed by hand. Once completed , Another final buffing. Then, Stand back and admire the shine http://www.autogeekonline.net/forum/images/smilies/smile.png
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133330264_zpsnviuvvfy.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133330264_zpsnviuvvfy.jpg.html)
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133356185_zps4zxcliko.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133356185_zps4zxcliko.jpg.html)
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133225300_HDR_zpsiyj62cfv.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133225300_HDR_zpsiyj62cfv.jpg.html)
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133238122_zpsd6runt9i.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133238122_zpsd6runt9i.jpg.html)
Click here to view the original image of 1024x576px.
http://i1126.photobucket.com/albums/l601/switchback28/IMG_20170212_133303034_zpsdbqykvk0.jpg (http://s1126.photobucket.com/user/switchback28/media/IMG_20170212_133303034_zpsdbqykvk0.jpg.html)