black 2012 kia.

[ascarbo27]

so not much sun this morning between 8 am and 12 pm but i did what i could lol for pictures.
in these two photos i took last night you can see the haze and the swirleshttp://www.autopia.org/forums/attachment.php?attachmentid=30618&stc=1http://www.autopia.org/forums/attachment.php?attachmentid=30619&stc=1
this photo i took this morning before working but after clay and wash. http://www.autopia.org/forums/attachment.php?attachmentid=30620&stc=1
well this is me tring to be one with the paint. lol http://www.autopia.org/forums/attachment.php?attachmentid=30621&stc=1
didnt really think this stuff would work all that well but these results dont lie. torq 22d long throw with a orange hex pad from cg...http://www.autopia.org/forums/attachment.php?attachmentid=30622&stc=1http://www.autopia.org/forums/attachment.php?attachmentid=30623&stc=1
had no lighting so had to use makeshift, first pic you cant really see me second pic is a mirror. http://www.autopia.org/forums/attachment.php?attachmentid=30624&stc=1http://www.autopia.org/forums/attachment.php?attachmentid=30625&stc=1 to be continued...:lol2:

[ascarbo27]

5050 on the trunkhttp://www.autopia.org/forums/attachment.php?attachmentid=30626&stc=1
final inspectionhttp://www.autopia.org/forums/attachment.php?attachmentid=30627&stc=1
delivery. http://www.autopia.org/forums/attachment.php?attachmentid=30628&stc=1

[Migue]

Looking good so far.

Edit: sorry, didnt know you were still posting and had a finished product, so ill change that to "it looks great!"

[ascarbo27]

Looking good so far.

Edit: sorry, didnt know you were still posting and had a finished product, so ill change that to "it looks great!"
haha no worries, i figured you didnt see the final. thank you!

[Irkie500]

How do you like that Torq polisher? Been in the market for a long throw and I am super torn on which to get.

[mjlinane]

Great work!!

[ascarbo27]

thank you Mike, irkie id go with a rupes. same prices well same ball park but with torq it stahls pretty easy and it runns pretty hard on flat pannels idk i ordered the torq x and they sent me this one idk not complaining just wish it were a mark 2 15mm

[The Driver]

How do you like that Torq polisher? Been in the market for a long throw and I am super torn on which to get.

Take it from a fellow Long Islander, get a used rupes. It`s a far better bang for the buck!

Btw, GREAT JOB!

[mnewxcv]

gotta be careful with the kias, some have some seriously thin paint.

[Irkie500]

thank you Mike, irkie id go with a rupes. same prices well same ball park but with torq it stahls pretty easy and it runns pretty hard on flat pannels idk i ordered the torq x and they sent me this one idk not complaining just wish it were a mark 2 15mm


Take it from a fellow Long Islander, get a used rupes. It`s a far better bang for the buck!

Btw, GREAT JOB!

Been looking hard at either the Griots G21 or the Rupes. Griots seems to be the winner in my head right now, but honestly both are amazing machines.

[The Driver]

Been looking hard at either the Griots G21 or the Rupes. Griots seems to be the winner in my head right now, but honestly both are amazing machines.

If you ever want to try them out I have both, just shoot me a pm. I have to say the G21 is definitely better then the Rupes mk1 both in ergonomics and power. Smoothness still goes to the Rupes though.

[Ronkh]

Great job !!!

[ascarbo27]

gotta be careful with the kias, some have some seriously thin paint.
do they really? i dont have a paint measure so i would never know but i used hd speed with an orange pad not too abrasive i would guess

[mnewxcv]

do they really? i dont have a paint measure so i would never know but i used hd speed with an orange pad not too abrasive i would guess

I have seen some with primer visible on the fenders right from the factory.

[ascarbo27]

wow, thank you mnewxcv note taken! prob wont touch it again