2013 G37x with a 12 hour deadline for lease inspection

[Broceratops]

The client needed his G37x to be in as good of shape as possible because the lease turn-in inspection was.....THE NEXT DAY. It had been washed semi-regularly, he had a dog...., and the leather had never been protected with anything.

With 12 hours I had to prioritize tasks to get the most utility for him out of the time I had with the car. This car had 19,100 miles on the clock.

Wheels: Meg`s Hot Rims, Tarminator, boars hair brush, speedmaster junior brush, and a microfiber towel to clean behind the spokes. Repeated this step 2X
Tires: Wesley`s Bleche White with a boars hair brush. Repeated this step 3X, Finished with CG Silk Shine
Rinse/Pre-soak with Tarminator and Meg`s APC
Wash with Meg`s Ultimate Wash and Wax
Clayed with Mother`s 80g yellow clay and Megs UWW as lube
Exhaust: Speedmaster wheel brush, 0000 steel wool, p21s polishing soap followed by CG Heavy Metal
Polishing: GG6 Torq 5" backing plate, LC white pads, Megs 151. Certain areas were hit with CG V32 and Meg`s Microfiber polishing pads.
Interior: Vacuum, upholstery brush, boars hair brush, CG Fabric clean, Lexol 3-in-1
Glass: Invisible Glass with Rain Repellent
Final wipe down with Meg`s spray wax.

http://i.imgur.com/N2P5OJ8.jpg
http://i.imgur.com/73Ekmrt.jpg
http://i.imgur.com/v7uiuvT.jpg
http://i.imgur.com/CZrxdJx.jpg
http://i.imgur.com/xvlJdXj.jpg
http://i.imgur.com/7qExQia.jpg
http://i.imgur.com/BABdzge.jpg
http://i.imgur.com/aTGU1DJ.jpg
http://i.imgur.com/p5epca6.jpg
http://i.imgur.com/9leZ4aA.jpg

Ok so the exterior was pretty trashed, the only saving grace was the forgiving paint color. Exhaust had never been touched, wheels never cleaned properly, and bug guts had started etching the front end. Nothing was extreme, but everything needed to be addressed.

[Broceratops]

http://i.imgur.com/oZp6nFU.jpg
http://i.imgur.com/bUnzadd.jpg
http://i.imgur.com/eNNoM61.jpg
http://i.imgur.com/Ca704WF.jpg
http://i.imgur.com/tpsvLLs.jpg
http://i.imgur.com/JDIUmtr.jpg
http://i.imgur.com/KckKnK3.jpg
http://i.imgur.com/tacrdKE.jpg
http://i.imgur.com/4iywrDW.jpg
http://i.imgur.com/XZLbTkB.jpg

So interior was pretty rough. The leather, windows, dash, door panels, arm rest floor mats, seat backs were all covered in dog hair and saliva. No big spills, some salt and wear on the front floor mats, and a few spots here and there.

[Broceratops]

http://i.imgur.com/arMl8AK.jpg
http://i.imgur.com/MxaAene.jpg
http://i.imgur.com/LE6qfPr.jpg
http://i.imgur.com/8T4UEXz.jpg
http://i.imgur.com/7hgGLMT.jpg
http://i.imgur.com/dOhFcOP.jpg
http://i.imgur.com/AktiiXe.jpg
Dirty Wheel
http://i.imgur.com/pViE1mR.jpg
Clean Wheel. Its amazing what a difference clean wheels and tires alone can do for he appearance of a vehicle.
http://i.imgur.com/ICNchs4.jpg
Again, Dirty Wheels
http://i.imgur.com/u3VWC7G.jpg
And Clean Wheels
http://i.imgur.com/m4yUy7l.jpg

[XxBoostinxX]

Nice work! What did you use on the leather?

[Broceratops]

Had to get rid of this scratch because it surpassed the 2" rule from his lease agreement.
http://i.imgur.com/JZrv8lc.jpg
Gone
http://i.imgur.com/iddw9hE.jpg
Area around door handles pretty rough on both sides.
http://i.imgur.com/c76GEAv.jpg
Fixed
http://i.imgur.com/onUyiuc.jpg

And some "Final" shots. I hadnt dressed the tires, removed the stickers from the windshield or removed the phone cradle, but light was getting low so I had to take a few pics.
http://i.imgur.com/deWr2fz.jpg
http://i.imgur.com/NoXBLGR.jpg
http://i.imgur.com/Z8cONb4.jpg
http://i.imgur.com/QnAJOt9.jpg

Thanks guys!

[Broceratops]

Nice work! What did you use on the leather?

I used a boars hair brush, microfiber towels and Lexol 3-in-1.

[edb]

Nice work. How did you get the scratches out from under the door handle?

[Ronkh]

Nice job!

[Broceratops]

Nice work. How did you get the scratches out from under the door handle?

I clayed the area very well, then used a pea sized drop of CG V32 and my fingertip. Initially I rub the polish perpendicular to the direction of the nail marks, then alternate back and forth. You can feel the polish start to break down, at that point I ease up on pressure. Not rocket science, but you want those areas to be as glossy or even glossier than the rest of the car.


Nice job!

Thanks!

[Migue]

Very nice, did you end up polishing all the paint? or just spots where the scratch(es) were? Curious since it was a Lease.

[Broceratops]

Very nice, did you end up polishing all the paint? or just spots where the scratch(es) were? Curious since it was a Lease.

I polished all of the paint since 151 provides a bit of protection/water beading anyway. Didn`t spend a ton of time on the polishing. LC tangerine hydrotech and the 151 would have brought the paint to 90%, whereas I got it to 80% and removed the rids.

[Stokdgs]

What an improvement over a totally - Pig - car...
You did a Great Job !!!

Too bad some people do this to their car - lease or not -

Meguiars D151 Reconditioning Cream has always been a good predictable AIO for production work - I used it on a bunch of white work vans once with a Rotary, and the dang things looked so good the people were able sell all 3 of them the very first day they put them out on the lot..

Those surface scratches you took out around the door handles turned out great..
I like to use a little Meguiars 105 with some moisture on a soft white cotton towel and 1 finger to get behind the handle and get all those zillion finger nail scratches out.. It always get those door cups looking better than new..

Incredible work in a short amount of time - inside and out !
Thanks for the hard work and for sharing this..
Dan F

[edb]

Thanks for the advice on that my sisters car has the ring scratches there pretty bad. I know i couldnt fit the 5.5 inch polisher in there. :P

[Stokdgs]

Thanks for the advice on that my sisters car has the ring scratches there pretty bad. I know i couldnt fit the 5.5 inch polisher in there. :P

Yeah, I have seen hundreds of those scratches, they get there as you said from rings, and from long fingernails.. :)
The M105 or even M101 or M Ultimate Compound on a cotton towel and your 1 or 2 fingers behind the handle will knock those defects right out amazingly!
I like to use M105 because it really works fast and finishes down beautifully, and I have a lot of it.. :)
Dan F

[Migue]

Huge + for the M105 with moist cotton towel approach. It is my "go to" and never disappoints! Amazing at how quickly it gets rid of those nail scratches. What is also amazing is how most people won`t even realize that they are there and how they got there until you point them out during a quote/inspection :wow:.