PDA

View Full Version : Black C6 saved from the work of another detailer



Pages : [1] 2

GoFast908Z
01-12-2015, 05:07 AM
This corvette owner sought me out to see if anything could be done to make his car look better. He had had another well known detailer in the bay area work on the car and it "just didn`t look right". After about 30 sec it was obvious the previous detailer didn`t know how to correctly work the hard corvette clear coat. Heavy DA haze and micro marring were present all over the car along with a few strike-throughs (when people say you can`t burn with a DA....that`s not exactly true). After 2 days of re-compounding and two more rounds of polishing, this C6 was back to looking sharp again!



upon arrival

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/592.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/593.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/594.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/597.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/601.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/603.jpg




lots more DA haze and micromarring

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/605.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/607.jpg




50/50 shot

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/611.jpg




http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/615.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/617.jpg



After compounding

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/618.jpg




More defects. Also 1/8" 3M Fine Line tape used to protect edge that had be compromised by other detailer, keeping the burn mark from getting larger during correction work.

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/619.jpg


After

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/620.jpg


http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/621.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/622.jpg




All finished and sealed with Blackfire Wet Diamond

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/623.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/624.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/625.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/627.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/628.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/629.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/632.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/633.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/634.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/635.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/637.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/638.jpg

http://i209.photobucket.com/albums/bb71/immaculate_reflections_showcase/14Corrections/640.jpg



Thanks for looking!

rottenII
01-12-2015, 07:06 AM
Beautiful!

mnehls86
01-12-2015, 10:15 AM
Looks great now!

ShaneB
01-12-2015, 10:44 AM
Wow... How do you do that with a DA???

Pats300zx
01-12-2015, 11:03 AM
Exactly how black should look Jeff. Great work !!!

Stokdgs
01-12-2015, 12:33 PM
Beautiful work, Jeff !!!

You have to wonder, how does this man go to a Detailer, and come pick this up, look at how awful the paint was, not notice the burn through/s, and Pay for It ????
That work (??) was Awful if you would even call it work at all !!!

Thanks for taking a lot of time to bring this back from the quick and the dead... :)
Dan F

Ronkh
01-12-2015, 12:36 PM
Nice work.

Why are the head lights round ?? :)

Jsmooth
01-12-2015, 05:13 PM
Awesome work Jeff! Was that the one that took 30 hours to fix the hood?

GoFast908Z
01-12-2015, 05:14 PM
Thanks guys!

No Joe that was the repainted Z06

Scottwax
01-24-2015, 04:42 PM
Excellent! I`ve done enough black C6 Corvettes to know you really earned your money on that job!

silver2kws6
01-24-2015, 05:00 PM
So if i was to buff my fathers 06 black C6 would you recommend this for a semi newbie with a GG6 and orange pad w/ some 3dHD Adapt ? light marring nothing crazy just normal everyday use. Or leave it alone and just keep up the clay/waxing ? I dont need perfection just something better than whats currently there. Let me know your thoughts on this paint.

BayAreaTech
01-24-2015, 06:27 PM
Excellent turn around.

jimmie jam
01-26-2015, 09:06 AM
Nice work.

Why are the head lights round ?? :)

Those are after market lights. This coupe has had Z06/GS rear fenders and spoiler added for a "wide booty" look. Front body panels appear stock.

Beautiful correction indeed!

House of Wax
01-26-2015, 09:53 PM
Nice save......black beauty is lookin proper now

RaysWay
01-27-2015, 12:35 AM
:10: