Sam's microfiber towels - falling apart - highly disappointed!

[eddiehaskell]

In another thread I mentioned buying these to use for GDWM.` I used them for the first time a few days ago and last night I washed them.` I washed them by themselves with just a little Purex (1/4 capfull).` I then put them in the dryer for 10 minutes and took them out damp to air dry.` When I took them out, I noticed that almost every corner had some stiff backing material popping out.` The corners on almost every towel were sorta folded down and stuck to the towel due to the stiffer material sticking to the microfiber.` The backing material is very rough and could easily scratch paint.`


`


Two packs of these only cost me $30, but I would rather have 7 or 8 towels that can be washed and reused on paint. I`m going to return these and maybe try microfibertech`s 600 gsm green/gray towels.`

[pwaug]

I have some Sam`s towels that I use for interior, wheels etc and have not had that problem.


`


That being said, the Rag Company has some high quality towels at good prices and if you order on Fridays shippping is free```` http://www.theragcompany.com/ (`http://www.theragcompany.com/`)


`


Autoality.com also has some great towels at good prices and if your order is over $25 and under 5 lbs shipping is free`` http://www.autoality.com/store/pc/Microfiber-Products-c16.htm (`http://www.autoality.com/store/pc/Microfiber-Products-c16.htm`)


`


If you start shopping around for MF towels you`ll notice allot of places sell the same towels with a different name and price.

[Accumulator]

eddiehaskell- At least you have plenty of MFs for non-detailing/household use.