08Sunburst
02-26-2012, 09:54 PM
Was nice enough today to get the fiat clayed, buffed, and sealed.
Washed, clayed with claymagic blue clay, polished with UNO on a white LC CCS pad, sealed with Poxy on a blue LC CCS pad. I have yet to touch the wheels/suspension/wheel wells. Ill save that for once the weather is nicer and i have some extra time.
There were a few dealer installed swirls and scratches, all of which were corrected/removed.
Pics in somewhat of an order:
After claying the hood, definitely some bonded contaminants from sitting on the dealers lot, etc etc.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001873.jpg
Nasty dirty claybar..
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06224.jpg
Prime the pad with pinnacle pad conditioner, 1-2 sprays
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06229.jpg
Uno, the best compound/polish i have EVER used.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06230.jpg
Four pea sized drops to start, 3 pea sized drops after that. Roughly will cover a 2x2 foot area.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06231.jpg
Some reflection shots after polishing(no cutting needed, very light and minor defects):
Hood
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06233.jpg
1/4 panel
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06237.jpg
Door
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06240.jpg
Had a few scratches from the dealer, this is one of the worst ones:
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001879.jpg
and corrected:
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001881.jpg
Chrome trim polished out as well.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06244.jpg
After i had the paint where i wanted it, i switched to a blue LC pad, and applied the hd Poxy.
Poxy was applied to the paint, glass, and black trim.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06248.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06253.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06254.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06251.jpg
Let the poxy cure for about 20 minutes or so, and here are the results:
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06255.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001885.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001886.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001888.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06271.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06271.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06273.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06272.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06264.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001893.jpg
Going to try for some sun shots tomorrow, by the time i was done this evening, was too dark.
I still have to take care of the wheels, wells, and suspension, but its a brand new car, so shouldnt be TOO terrible.
Washed, clayed with claymagic blue clay, polished with UNO on a white LC CCS pad, sealed with Poxy on a blue LC CCS pad. I have yet to touch the wheels/suspension/wheel wells. Ill save that for once the weather is nicer and i have some extra time.
There were a few dealer installed swirls and scratches, all of which were corrected/removed.
Pics in somewhat of an order:
After claying the hood, definitely some bonded contaminants from sitting on the dealers lot, etc etc.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001873.jpg
Nasty dirty claybar..
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06224.jpg
Prime the pad with pinnacle pad conditioner, 1-2 sprays
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06229.jpg
Uno, the best compound/polish i have EVER used.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06230.jpg
Four pea sized drops to start, 3 pea sized drops after that. Roughly will cover a 2x2 foot area.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06231.jpg
Some reflection shots after polishing(no cutting needed, very light and minor defects):
Hood
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06233.jpg
1/4 panel
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06237.jpg
Door
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06240.jpg
Had a few scratches from the dealer, this is one of the worst ones:
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001879.jpg
and corrected:
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001881.jpg
Chrome trim polished out as well.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06244.jpg
After i had the paint where i wanted it, i switched to a blue LC pad, and applied the hd Poxy.
Poxy was applied to the paint, glass, and black trim.
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06248.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06253.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06254.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06251.jpg
Let the poxy cure for about 20 minutes or so, and here are the results:
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06255.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001885.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001886.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001888.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06271.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06271.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06273.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06272.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/DSC06264.jpg
http://i49.photobucket.com/albums/f270/matthewstetz/Fiat%20detail/WP_001893.jpg
Going to try for some sun shots tomorrow, by the time i was done this evening, was too dark.
I still have to take care of the wheels, wells, and suspension, but its a brand new car, so shouldnt be TOO terrible.