Duragloss Product`s Combination

[cloudbuster]

Hi all I been searching on the net and came to this understanding maybe im wrong sometimes too much reading is also bad but good think we have forums

The main car is and old civic 96 silver paint in no so great condition in some areas



By steps

1. Shampoo 901

2. PC-No.2 (Buffing & Polishing Cleaner) 652

3. Clay bar

4. Marine & RV Polish 501

5. Polish Bonding Agent 601

6. Total Performance Polish 105

7. Clear Coat Polish 111

8. Mix Marine & RV Detail Spray 521 with Aquawax 951



that`s what I understand would give the best look protection but I might be wrong or I dont need all those products

now that I look at it would I need step 2 and 4 products?

would 105 go before or after 111?

are the steps in the right order?



Thank!

[imported_Larry A]

Clay before precleaner,If finish comes out good you may not need 501,you will not need 111 after 105, use either detail spray 24 ours after 105.

[cloudbuster]

thanks.

If there a Duragloss product that would help to save the clay bar step or I should skip the clay bar.

[imported_altez]

thanks.

If there a Duragloss product that would help to save the clay bar step or I should skip the clay bar.



You should stick with the clay bar step!

[justin30513]

Clay bar is a must before polishing. Wash and if the paint feels rough, clay.

[pwaug]

Don`t skip the clay!!! If you want to save a step -- when applying 501 or 105 mix 4 to 1 with the 601 Bonding agent. This will allow you to apply your next product in a couple of hours rather than waiting overnight for the product to bond.