Ultima Paint Prep Plus PPP

[KnuckleBuckett]

Any experience with this?



Ultima Paint Prep Plus (http://www.ultimafinishcare.com/ult-4012-120.html)



How does it finish out?



Should I use this as my last stage polish/prep/jeweling with say a red CCS pad? I am using a rotary so speed advice would be appreciated.



Thanks.

[wascallyrabbit]

you linked it to the lsp. guessing thats not what you asking about. the prep product seems to be an aio type product.

[KnuckleBuckett]

Ahhh fixed.



Thank you.

[Alfisti]

Use it as finishing polish, but it`s very pad dependent. In other words, it`s less aggressive than you think. I removed fine swirls with an orange pad and left it LSP ready. I think a red pad is too gentle to work the polish. Maybe something a bit more aggressive like a black or white pad. What are you working on?

[KnuckleBuckett]

White pad seemed to do the trick. Thanks a bunch. I find this kind of odd to work with....still learning I suppose. I wonder how PPP would react to PFW....??

[wascallyrabbit]

in the event you try it let us know.

[KelleyBlum2011]

it`s less aggressive than you think.

http://www.amovos.info/qinp1.jpg

http://www.amovos.info/qinp2.jpg

http://www.amovos.info/qinp3.jpg

[countrysquire]

Used some on my personal car just yesterday. The finish was already where I wanted it after M105 & PO85RD and didn`t notice any improvement (or degradation). I used it for its claimed ability to prime the surface for UPGP.

[KnuckleBuckett]

Yup that is what I was doing. Played with the white pad and now the gray CCS pad. The gray pad seems to leave a brighter finish, but it may be that I worked it a bit longer. Going gray in the future when prepping for UPGP.

[countrysquire]

BTW, don`t use my reply as a point of reference. I was applying it as one would an LSP just for the priming effect, thus no real polishing. Sure looked like a million dollars after the UPGP though...

[KnuckleBuckett]

I will have 6 coats before I finish. 12 hours apart.