View Full Version : g|techniq`s P1
Does anyone know what the P1 polish is rated at when using a Lake Country yellow, orange and white foam pad is?
Using a menzerna scale of 0-5, can one estimate what the cut/gloss/grit of P1 is?
Sent an E-mail to gtech CS but have not received a reply.
wascallyrabbit
08-19-2011, 03:18 PM
it cuts about the same as meg 105 maybe a little more. polishes out nice better than 105.
this thread should answers most of your questions about p1.
http://www.autopia.org/forum/machine-polishing/135964-non-diminishing-abrasives-test-meguiars-vs-gtechniq.html
Lowejackson
02-04-2012, 05:35 AM
I spent several hours yesterday trying out P1, with a wool pad I would say it is a fairly aggressive polish similar to Menz Power Gloss but easier to use. On a softer pad it also works well. Spritzing with water to enhance the polishing time is probably the only drawback
If there is a method of working with P1 which does not involve a lot of splatter I have yet to find it, although clean up is very quick and easy
Thomas Dekany
02-04-2012, 12:48 PM
I never found P1`s ability to cut anywhere near UNO`s. P1 cutting better than 105? I must be doing something wrong. :D
Lowejackson
02-04-2012, 02:57 PM
I have not tried Uno but what were your impressions of P1
Thomas Dekany
02-05-2012, 12:05 AM
Compared to UNO, it was like a medium polish, but you ask someone else here and that person will tell you that UNO is useless. P1 did have a nice look though.
I have not tried Uno but what were your impressions of P1