PDA

View Full Version : Peachstate Detail: 2007 Black Range Rover Sport paint correction


Pages : [1] 2
gmblack3
06-19-2011, 01:06 PM
2007 Range Rover sport

70k miles

Exterior paint correction only.



Thanks to Joey for his help!



Meguiars Hyper wash.

Wheels cleaned with Sonax full effect.

Clay

Micro mesh 4000 to remove over spray on hood.

Meguiars D300/surbuf 6.5" pads/GG polisher

RIDS spot polished with M105/surbuf 4" pads/PC

Meguiars M205 w/ Lake country Tangerine flat pad

Meguiars M205 w/ Lake country black flad pad

Rewash with hyper wash

Blackfire Wet Diamond

Z-16 on tires.

Tips polished with M105



Swirls:

http://img812.imageshack.us/img812/9656/p1010386k.jpg



RIDS:

http://img683.imageshack.us/img683/9500/p1010379hm.jpg



Hood before sanding:

http://img34.imageshack.us/img34/6601/p1010397o.jpg



Hood after sanding with micro mesh 4000 to remove over spray. I clayed first, then followed with the MM 4k. This makes very short work of any overspray:

http://img683.imageshack.us/img683/3806/p1010411ds.jpg



50/50 hood after Megs D300/surbuf, still requires a final polishing:

http://img197.imageshack.us/img197/4991/p1010414f.jpg



Hood after Megs D300/surbuf, still requires a final polishing:

http://img813.imageshack.us/img813/3151/p1010416v.jpg



http://img220.imageshack.us/img220/8271/p1010441af.jpg



http://img856.imageshack.us/img856/3443/p1010461s.jpg



http://img204.imageshack.us/img204/8494/p1010464s.jpg



http://img228.imageshack.us/img228/9854/p1010462m.jpg



Before:

http://img541.imageshack.us/img541/7971/p1010427k.jpg



After:

http://img39.imageshack.us/img39/9435/p1010468n.jpg



http://img703.imageshack.us/img703/6848/p1010456a.jpg



http://img822.imageshack.us/img822/2714/p1010455w.jpg
MirrorDetailing
06-19-2011, 01:21 PM
Nice job. This was the one that Joe was telling me about. Looks like a good bit of work with a great turn around.
imported_Dust2Glory
06-19-2011, 01:29 PM
Great detail... Chrome does not look good on that.



May want to consider a second coat of tire dressing... maybe its just the pics, but it looks blotchy
gmblack3
06-19-2011, 01:44 PM
Nice job. This was the one that Joe was telling me about. Looks like a good bit of work with a great turn around.



Thanks MachNU! Yes it was a bit of a PITA for sure. :)




Great detail... Chrome does not look good on that.



May want to consider a second coat of tire dressing... maybe its just the pics, but it looks blotchy



Thanks! Yes tires got another coat after pics where taken.
Accumulator
06-19-2011, 03:51 PM
gmblack3- Ah, so that`s how it finally turned out :D Very nice :xyxthumbs



So you were able to go straight to the M205/tangerine after the SurBufs, huh?
C. Charles Hahn
06-19-2011, 05:14 PM
Looks much better indeed!
gmblack3
06-20-2011, 03:13 AM
gmblack3- Ah, so that`s how it finally turned out :D Very nice :xyxthumbs



So you were able to go straight to the M205/tangerine after the SurBufs, huh?



Thank you Accumulator! No issue at all going to tang/m205. It actually finished out very well, but went with black after to ensure a high level of gloss.




Looks much better indeed!



Thanks Charlie!
RenuAuto
06-21-2011, 09:39 PM
Interested to learn more about where you got the 4k pads from. Haven`t seen these before!
David Fermani
06-21-2011, 09:45 PM
That sucka was a beast adn looks beautiful!




Interested to learn more about where you got the 4k pads from. Haven`t seen these before!

My favorite approach and product for removing overspray:

MICRO-MESH ROLLS [ROLL-01] - $140.07 : MICRO-SURFACE FINISHING PRODUCTS, INC (http://micro-surface.com/index.php?main_page=product_info&cPath=273_192&products_id=6)
C. Charles Hahn
06-21-2011, 10:03 PM
That sucka was a beast adn looks beautiful!





My favorite approach and product for removing overspray:

MICRO-MESH ROLLS [ROLL-01] - $140.07 : MICRO-SURFACE FINISHING PRODUCTS, INC (http://micro-surface.com/index.php?main_page=product_info&cPath=273_192&products_id=6)



Which grit, David?
David Fermani
06-21-2011, 10:06 PM
I prefer the 4000 grit. For years we used to sand every car we did for dealers/retail with this stuff. Call Micro-Surface, ask for Debbie Abraham and ask for some samples. Tell he I referred you and you`re golden.
C. Charles Hahn
06-21-2011, 10:19 PM
I prefer the 4000 grit. For years we used to sand every car we did for dealers/retail with this stuff. Call Micro-Surface, ask for Debbie Abraham and ask for some samples. Tell he I referred you and you`re golden.



Thanks; I`ll give them a call tomorrow and see about giving it a shot. This seems like an interesting technique for sure.
autoconcierge
06-22-2011, 08:48 AM
A black SUV.............my idea of a goodtime :high5: just did a estimate for the exact car Bryan and the owner did NOT like the number discussed(Just cannot understand why that was??).



The owner of the shop I managed had one of these and it was the 20 minute color.......looked good for 20 minutes, what a turn around Bryan!, and who said you could deviate from using D300 with a Surbuf pad??(lol).
polishworks
10-07-2011, 12:39 PM
Hey there beautiful work!



I am doing the exact same rover today with even worse paint !

May I ask what you quoted the customer for this work ?



Drew
autoaesthetica
10-07-2011, 02:58 PM
I love this paint, very polishable in my experience. No gummy, grabby stuff, just medium paint to polish - hella flaky with metallic too. Nice work Bryan.