Meguiars Microfiber System

[gmc05]

A quick little review of my testing of the new system. I was also chosen along with many others to test and review the system and give feedback to Jason Rose.



I first got to try the system out at Mobile Tech Expo in January of 2010 and was told we would be getting samples in February I guess they just didn`t say which February.



I received my sample kit in January and with the terrible weather we have been having I haven`t had as much time as I would have liked to try it out but below are a few pictures and video of my findings so far.



http://www.autopia.org/gallery/files/2/7/6/7/1/megspromo2w.jpg

From Mte

http://www.autopia.org/gallery/files/2/7/6/7/1/megssema.jpg

Display at SEMA 2010

http://www.autopia.org/gallery/files/2/7/6/7/1/cimg6054w.jpg





http://www.autopia.org/gallery/files/2/7/6/7/1/cimg6056w.jpg





http://www.autopia.org/gallery/files/2/7/6/7/1/cimg6058w.jpg





http://www.autopia.org/gallery/files/2/7/6/7/1/cimg6059w.jpg





http://www.autopia.org/gallery/files/2/7/6/7/1/cimg6060w.jpg



http://www.autopia.org/gallery/files/2/7/6/7/1/subaru1.jpg



Hood before



http://www.autopia.org/gallery/files/2/7/6/7/1/subaru2.jpg



After just D300



http://www.autopia.org/gallery/files/2/7/6/7/1/canon_shots.1.jpg



09 WRX



http://www.autopia.org/gallery/files/2/7/6/7/1/canon_shots_4_.1.jpg



Before waxing



http://www.autopia.org/gallery/files/2/7/6/7/1/cimg6189.jpg

Both D300 & D301



http://www.autopia.org/gallery/files/2/7/6/7/1/wrx3.jpg





Rear bumper half and half





<iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/pMNFsvKCI74?hd=1" frameborder="0" allowfullscreen></iframe>



Video of WRX wish the sun had stayed out long enough for after shots



There are some amazing write ups on this system look forward to reading them all and trying out what has worked well for others.



One thing I definitely notice was priming the pad properly is very important especially a new one.



A special thanks to Jason Rose and the Team at Meguiars for giving me the opportunity to try this system out before being released to the public.

[Accumulator]

gmc05- Thanks for posting that! I`m following the intro of this system with great interest.

[frito]

I notice that there is a 3 inch "spot" combo as well. Sooo, what are the chances of adapting this to the cyclo polisher?

[Accumulator]

I notice that there is a 3 inch "spot" combo as well. Sooo, what are the chances of adapting this to the cyclo polisher?



3" pads are to small to work properly with the Cyclo. Even if you whittled down some plates to fit the smaller pads, it wouldn`t work out as the smaller pads wouldn`t do the overlapping-motion thing properly.

[frito]

I just new someone would rain on my parade :(

[Street5927]

Do you think the pads will work well with M105/M205 or are they specifically designed for the compound/polish that comes with the kit?

[gmc05]

Do you think the pads will work well with M105/M205 or are they specifically designed for the compound/polish that comes with the kit?



I didn`t have chance to try with other products as I was asked to evaluate the system itself. I have more pads coming so I will try with other product and will keep them separate don`t want to risk cross contamination we mark all products on back of pads to eliminate the risk of this.



105 may work OK with the cutting pad or even 205 on less serve conditions. I think there are some post of others trying this.

[Barry Theal]

M105 is a defect killer with thi system.