AshyLarry
07-28-2010, 01:23 PM
Did a little detail over the weekend. My car has been polished and waxed 1-2x a year since I`ve owned it, but I drive the hell out of it, and it sees 60 highway miles a day. About to hit 100K so I figured its about time to do a little more than a 2 step detail. I apologize my pics are crap, I was dying it was so hot out that I didn`t take very many, and didn`t look them over until the car was done. Saturday required 4 t-shirt changes!
Materials for those interested:
Poorboys Car Wash
Simple Green
Sonax Wheel Cleaner
Menzerna PO83
Menzerna PO203S
Menzerna PO85RD
Menzerna PO115C
Adam`s APC
Adam`s Detail Spray
Adam`s Clay Bar
303 Protectant
P21S Carnauba Wax
5.5" Uber Pads
6.5" CCS Pads
PC 7424
Before Shots, don`t really show how crappy it looked. Car is covered in swirl marks, dried water spots, tons of tiny chips etc.... No bead or sheeting at all. Car hasn`t been done since last September....lazy I know.....
http://farm5.static.flickr.com/4153/4837762329_9d9e713898_b.jpg
http://farm5.static.flickr.com/4091/4837763001_dd3d5be0f5_b.jpg
Hit wheels with Sonax. Stuff works great, but pricey.
http://farm5.static.flickr.com/4149/4837763563_125ca45c66_b.jpg
Dried off read for business.
http://farm5.static.flickr.com/4128/4837764331_206ddf15f7_b.jpg
Some of the tools.
http://farm5.static.flickr.com/4127/4837766645_a21602c913_b.jpg
During Clay bar(I think). Ended up claying the entire car because it was so bad, and honestly, I should have used a medium grade clay, but this was all I had.
http://farm5.static.flickr.com/4106/4838378270_1e8f64ccd8_b.jpg
http://farm5.static.flickr.com/4147/4837766021_1b29aa03d5_b.jpg
After Super Intensive Polish and Yellow pad. I should have worked the polish in more, this was my first time using the stuff though, and I had crappy lighting. Couldn`t pull outside for inspection since it was downpour outside to boot. Oh well.
http://farm5.static.flickr.com/4125/4838380360_09509d3588_b.jpg
http://farm5.static.flickr.com/4153/4838380864_0858d02059_b.jpg
Custom Ducati towel holder...
http://farm5.static.flickr.com/4130/4837768835_b5bce382a7_b.jpg
After PO203S and PO85RD I think, I forget when I took this. I alternated between an Uber pad and a CCS to see if there was any difference.
http://farm5.static.flickr.com/4106/4838382292_3aea9697ae_b.jpg
http://farm5.static.flickr.com/4107/4838382850_63961d0a39_b.jpg
Sealant applied, I only let it cure for 45 minutes but I think next time I`ll let it go longer. I let it sit 12 hours before applying wax over it.
http://farm5.static.flickr.com/4109/4838383922_283919af63_b.jpg
http://farm5.static.flickr.com/4146/4837771769_06c2131980_b.jpg
Wax, didn`t fully finish wiping it off before I took this pic.
http://farm5.static.flickr.com/4106/4837772401_d574c867bf_b.jpg
http://farm5.static.flickr.com/4130/4838385456_b2e94944fb_b.jpg
Outside, wiped down with detail spray. Etc....
http://farm5.static.flickr.com/4086/4837773743_30e3932d08_b.jpg
Wash off last night.
http://farm5.static.flickr.com/4147/4838386988_17449a213c_b.jpg
http://farm5.static.flickr.com/4128/4838387612_53d5d54972_b.jpg
http://farm5.static.flickr.com/4107/4838388078_2788a0c5e8_b.jpg
Came out ok, I`d say its about 80% of where it will be when I redo it before winter. I learned a lot this time through. Overall though for 100k miles, 80 of which are Rochester, I`m pretty happy. Headlights were also done with the same process and came out awesome, they were super cloudy and beat beforehand. Almost new now.
I`d love any feedback from experienced people, I`m looking to begin doing this as a part time weekend gig so any advice is appreciated. I did the interior and engine as well just didn`t take pictures. I`ll be doing a couple motorcycles in the next week so I throw up some pics then.
Materials for those interested:
Poorboys Car Wash
Simple Green
Sonax Wheel Cleaner
Menzerna PO83
Menzerna PO203S
Menzerna PO85RD
Menzerna PO115C
Adam`s APC
Adam`s Detail Spray
Adam`s Clay Bar
303 Protectant
P21S Carnauba Wax
5.5" Uber Pads
6.5" CCS Pads
PC 7424
Before Shots, don`t really show how crappy it looked. Car is covered in swirl marks, dried water spots, tons of tiny chips etc.... No bead or sheeting at all. Car hasn`t been done since last September....lazy I know.....
http://farm5.static.flickr.com/4153/4837762329_9d9e713898_b.jpg
http://farm5.static.flickr.com/4091/4837763001_dd3d5be0f5_b.jpg
Hit wheels with Sonax. Stuff works great, but pricey.
http://farm5.static.flickr.com/4149/4837763563_125ca45c66_b.jpg
Dried off read for business.
http://farm5.static.flickr.com/4128/4837764331_206ddf15f7_b.jpg
Some of the tools.
http://farm5.static.flickr.com/4127/4837766645_a21602c913_b.jpg
During Clay bar(I think). Ended up claying the entire car because it was so bad, and honestly, I should have used a medium grade clay, but this was all I had.
http://farm5.static.flickr.com/4106/4838378270_1e8f64ccd8_b.jpg
http://farm5.static.flickr.com/4147/4837766021_1b29aa03d5_b.jpg
After Super Intensive Polish and Yellow pad. I should have worked the polish in more, this was my first time using the stuff though, and I had crappy lighting. Couldn`t pull outside for inspection since it was downpour outside to boot. Oh well.
http://farm5.static.flickr.com/4125/4838380360_09509d3588_b.jpg
http://farm5.static.flickr.com/4153/4838380864_0858d02059_b.jpg
Custom Ducati towel holder...
http://farm5.static.flickr.com/4130/4837768835_b5bce382a7_b.jpg
After PO203S and PO85RD I think, I forget when I took this. I alternated between an Uber pad and a CCS to see if there was any difference.
http://farm5.static.flickr.com/4106/4838382292_3aea9697ae_b.jpg
http://farm5.static.flickr.com/4107/4838382850_63961d0a39_b.jpg
Sealant applied, I only let it cure for 45 minutes but I think next time I`ll let it go longer. I let it sit 12 hours before applying wax over it.
http://farm5.static.flickr.com/4109/4838383922_283919af63_b.jpg
http://farm5.static.flickr.com/4146/4837771769_06c2131980_b.jpg
Wax, didn`t fully finish wiping it off before I took this pic.
http://farm5.static.flickr.com/4106/4837772401_d574c867bf_b.jpg
http://farm5.static.flickr.com/4130/4838385456_b2e94944fb_b.jpg
Outside, wiped down with detail spray. Etc....
http://farm5.static.flickr.com/4086/4837773743_30e3932d08_b.jpg
Wash off last night.
http://farm5.static.flickr.com/4147/4838386988_17449a213c_b.jpg
http://farm5.static.flickr.com/4128/4838387612_53d5d54972_b.jpg
http://farm5.static.flickr.com/4107/4838388078_2788a0c5e8_b.jpg
Came out ok, I`d say its about 80% of where it will be when I redo it before winter. I learned a lot this time through. Overall though for 100k miles, 80 of which are Rochester, I`m pretty happy. Headlights were also done with the same process and came out awesome, they were super cloudy and beat beforehand. Almost new now.
I`d love any feedback from experienced people, I`m looking to begin doing this as a part time weekend gig so any advice is appreciated. I did the interior and engine as well just didn`t take pictures. I`ll be doing a couple motorcycles in the next week so I throw up some pics then.