Gtecnhiq C1 vs Aquartz vs collinite 476s

[JJ_]

Just spotted another like minded thread, good to see people testing straight away.



Basically I got my products through, just now I always turn to colly 476s for my winter wax, it is the longest lasting LSP that I own.



So first up all things created equal.



I wanted the paint perfect so I gave this a going over with a megs polishing pad, some 3m FCP and UF. I purposely left the aquartz area to test its filling abilities.



Of course this leaves behind some oils so out comes the ISO. I was very careful to put any MF`s in the wash bucket once used for the polish stage so I don`t contaminate the work area.



Aquartz Twins first



http://i6.photobucket.com/albums/y238/JJ_/IMG_8825.jpg



Ok so what I found was the instructions make this product seem much more complicated than it actually is.



Basically I firstly tried the rotary method, I sprayed some on the panel, put the metabo to setting "1" and then let the weight of the machine do the work. Two small patches got too warm and set prematurely (no jokes :lol:).



So I went for tried and tested, got my Sonus MF out. Sprayed the panel and worked the product in, I only did have of the divided sections at a time to ensure I was doing everything properly.



Ok so now the result. Never used a product which actually is this different and actually works. It truly does leave a scratch resistant finish. I have to remove the patch which set with an abrassive polish. :doublesho



The other two now had a lot to live up to. I literally cut back to basic polishes and LSP`s because this product is so good.



Before

http://i6.photobucket.com/albums/y238/JJ_/IMG_8813.jpg



After

http://i6.photobucket.com/albums/y238/JJ_/IMG_8819.jpg



Gtechniq C1.



Very easy to apply, think of it like a solvent, apply some with the pads and then wipe immediately.



Very nice finish and silky smooth. Great once again very impressed.



I notice a few find C1 difficult to apply, so long as you use the pads provided and a small amount it really is very easy. I am pretty taken aback by people finding it difficult, I managed to let DODO SN sit for too long, so there is hope for us all if I can apply C1.



Colly 476s.



Ok we all know this product and to be honest if Aquartz can last as long then thats fine by me. I want a product which masks my wash swirls and gives good protection.



Colly 476s went on and off very easily and again left a very nice finish as it does.



http://i6.photobucket.com/albums/y238/JJ_/IMG_8818.jpg



http://i6.photobucket.com/albums/y238/JJ_/IMG_8826.jpg



http://i6.photobucket.com/albums/y238/JJ_/IMG_8832.jpg



http://i6.photobucket.com/albums/y238/JJ_/IMG_8827.jpg



http://i6.photobucket.com/albums/y238/JJ_/IMG_8830.jpg



Again all things equal the car is in the car garage out of the rain as I feel the products would need time to cure to give a fair test.



Left Colly

Middle C1

Right Aquartz and Aquartz +



P.S. - I paid for these products they are not gifts so I have no commercial interests.

[JJ_]

Infact I have to add something here.



C1 is obviously just a sealant, Aquartz Twins are covering two bases they are a sealant and covering swirls.



Just to be clear C1 is a very good product and should probably be tested against 476s or Klasse SG.



I will do this at a later date, I will be buying more thats for sure, was very impressed by it.

[JJ_]

For ease of use I would say c1, If you aren`t well versed with aquartz it can end up settin prematurely and you have to polish with an abrasive to remove it.



I like aquartz because I have a solid black car and I need something to mask any remaining defects, at about 500-800 miles a week believe you me there are a few.



Two different products just waiting to see how long they both hold up now. I do have enough to coat c1 like I did with aquartz so that everythig is on a level playing field.



Update, the car has been in the Garage for a few days. So, I put some water on the test area just to see what the sheeting and beading is like.



C1 downright winner, it looks more aesthically pleasing. Only the OCD guys will know what I am talking about here.



Aquartz was very good just not as nice as C1. Aquartz is great for masking swirls right enough. So difficult !!!



To give an idea there is a noticeable difference between C1 and Colly 476s, C1 had rounder beads and the water dispersed quicker.



This is probably the hardest test I have ever conducted.

[sockster]

nice test although abit late/early to tell durability



and what is a normal wax doing in this glass coating test lol



didnt manage to get ur hands on opti-coat? that would make this test complete!

[JJ_]

Na no opti coat. I don`t think I can get it here.



I put the normal wax in because most people know 476s capapbilities and how long it lasts.



Ill keep this up to date. Durability will be tested and as I say will keep this up to date :D

[pootoo12000]

JJ: Great test! Is it me, or is that a HUGE bottle of C1? What did that cost you? I have just now gotten my first "silane tech" sealant and have it on one test panel. Supposed to last 3 years. If I can get 6 months of day one shine and beading, I`ll be happy. It does have some filling characteristics. Cannot really see myself letting my paint go for more than 6 months...nothing but washes can get pretty boring! Have you tried G/T C2? Not silane but silicon. Stuff works wonders, just melts into the paint! Ease of use and shine are among the best I have used. Durability is there, too.

[DM101]

here in USA we can not buy Gtecnhiq C1 or Aquartz

[AeroCleanse]

here in USA we can not buy Gtecnhiq C1 or Aquartz



You can buy Aquartz. I bought some, all you need to do is contact Aquartz directly.

[Setec Astronomy]

here in USA we can not buy Gtecnhiq C1 or Aquartz



One of those threads elsewhere that someone linked about Aquartz stated that detailing.com would be selling it...whoever they are.

[JJ_]

Good an interesting update !! I`ll add it later

[JJ_]

It`s still going !

[Legacy]

It`s still going !



Any updates? Thank you

[David Fermani]

It`s still going !



Please explain...

[Alexshimshimhae]

interesting to see how this works out

[D_Nyholm]

Where are the updates? Looks like he fell off the face of Scotland and left us all hanging. :(