View Full Version : Am I on the right track?
impalaman1963
05-13-2010, 11:43 AM
I know there`s better products out there. But I like Meguiar`s products.
Please add or subtract a Meguiar`s product you like from each step that you use.
Wash
Clay
Polish #83
Glaze/Seal #20
Wax #26 / NXT II
http://i67.photobucket.com/albums/h296/impalaman63/Tina004.jpg (http://s67.photobucket.com/albums/h296/impalaman63/?action=view¤t=Tina004.jpg)
Accumulator
05-13-2010, 12:15 PM
impalaman1963- I never liked #83 all that much :nixweiss
I`d rather do the real correction with M105 and then finish with M205 or even #80.
If you do use #83, I`d follow up with something milder. I`m not even 100% satisfied with how M205 finishes out.
getcha
05-13-2010, 12:57 PM
Just keep in mind NXT2 has enough cleaning to remove the stuff under it. So stick with #26, IME it looks fantastic on red.
Accumulator
05-14-2010, 09:33 AM
Just keep in mind NXT2 has enough cleaning to remove the stuff under it. So stick with #26, IME it looks fantastic on red.
I agree that #26 is a good (and available, and inexpensive) product for red, but I don`t find NXT v2.0 to have any real cleaning ability. I`ve used it over leaves-stuff-behind products like Autoglym SRP and 1Z PP, and it never cleaned those off :nixweiss Note it`s made to work OK over Meg`s "pure polishes" and those aren`t all that durable.
impalaman1963
05-14-2010, 01:55 PM
Should I try this combination?
Wash
Clay
Scratch X orSwirlX
Polish
Meguiars #105 Ultra-Cut Compound
Meguiar`s Solo WDFP-7 Foam Polishing Pad W8006 or W8207
Meguiar’s M02 Fine Cut Cleaner
Meguiars Mirror Glaze #205
Sealant
#7 or #21
Glaze
Meguiar`s Mirror Glaze #16
Wax
#26 or NXT II
Accumulator
05-14-2010, 04:14 PM
Should I try this combination?
Wash
Clay
Scratch X orSwirlX
Polish
Meguiars #105 Ultra-Cut Compound
Meguiar`s Solo WDFP-7 Foam Polishing Pad W8006 or W8207
Meguiar’s M02 Fine Cut Cleaner
Meguiars Mirror Glaze #205
Sealant
#7 or #21
Glaze
Meguiar`s Mirror Glaze #16
Wax
#26 or NXT II
You might need a 7006 pad with the M105.
You will *NOT* need to use M02 between the M105 and the M205.
The #7 is the glaze and I doubt you`ll need that.
The #16 is a wax that you might want to use instead of the #26 (or not).
Personally, I`d just choose one LSP (#21, or NXT, or #16, or #26) and not make the whole thing so complicated.