OK, This is it!

[solekeeper]

I think. Ok Fellow detailers, here goes.

Using this old thread I created (No this is not a duplicate)

http://www.autopia.org/forum/car-detailing/127640-why-happening.html





I along with Rasky, Accumulator, and Scott have all come up with a plan to help me with my polishing process at my shop.



Two factors, here (They will not change, please keep in mind)

-Rotary Only

-Cars are sanded with 2000 grit.

-Aftermarket clear (This is a body shop)



So I and one of the fellow members, (Rasky) agreed that 3M`s Perfect it 3k has the same cut ability of m105, but with the M105 finishing down a ton better. (Rasky, if this isn`t true, please correct me) :)



So with this being said, I decided to cut out 3m from the line up, and use



-M105- Burgundy Wool Pad

-M205- Yellow Meguiars Pad (Foam)

-UF-Light Blue Foam (3M)



We have agreed these 3 steps should be taken to aquire a perfect finish. (For my type of correction)



Now, I would like for the rest of you guys to critique and let me know what you think of the 3 step line up. (Please have first hand experience with the products/pads before commenting) The compounds will most likely NOT change, however pad selection is just as important) So mainly looking for good pads to use with m105 and m205.

Won`t need anything for UF since I have the 3M pad already.





Thanks to all of you guys!