View Full Version : 2007 MKV5 Step by Step Full Correction( 100+ pics)
Nikku
11-16-2009, 04:18 PM
VW GTI Full Correction – Step by Step Write-Up
A few months ago I promised to detail my cousins VW GTI however I have been busy with client details and I wanted to make sure that I had enough time to take a lot of step by step pictures and do a full correction.
Ok so to the present day. My cousin went on vacation so I chose two days out of the two weeks he was away to work on his vehicle. Thankfully our schedules worked out and I had freed up two days so I could detail his GTI.
Ok so let us get started. I am going to try something a little different this time around by accompanying the pictures with product and process information. So bare with me and hopefully you will enjoy the write up as much as I have enjoyed writing it up.
BEFORES
So before I do anything to the car I like to go around with my D40. You can use any camera with a decent quality pixel rate but I find that DSLR provides for better depth and sharpness. Even though I do a walk through at the beginning I find that the process of snapping quality pictures really helps with me with prioritizing trouble areas. If surprises pop up I make sure to call the customer to let him know of the issue before proceeding. It really saves me and customer time and hassle.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1863.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1864.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1865.jpg
Possible bird etching issue on this particular panel.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1866.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1867.jpg
Scratch on driver side mirror with paint transfer. Possible solutions could be heat gun and a light wipe, ISA wipe (isopropyl and water 50:50 mix), clay & clay lube and polishing.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1868.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1869.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1870.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1871.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1872.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1873.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1874.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1875.jpg
The GTI is obviously dull but there is also a noticeable grayish tinge but it is nothing to be overly concerned about.
WASH
Ok so I’ve done the post detail walk through now let us move on to the wash phase of the detail. After my washes I always like to snap additional pictures because you never know what could be hiding underneath all that dirt. Dirt may not be dirt and maybe a scratch.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1876.jpg
My tools of choice for washing this GTI’s paint is as follows:
2 Grit Guards
2 Sheepskin Wash Mitts
1 Detail Brush
Chemicals Guys Maxi Suds
Optimum No Rinse
Optimum Power Clean
I mix all three together. 1 oz of Maxi Suds, 1 oz of ONR and 2 oz of PC. I like a little suds so I use Maxi Suds to lift the dirt, ONR is added to soften the water and to pull the dirt away from the paintwork and PC to get rid of any existing wax or sealant even though this particular GTI did not have any protection to speak off.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1877.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1879.jpg
The tools that I used for the wheels are:
Detail brush (which are brilliant for lug nuts)
Grit guard
One bucket
Daytona Wheel Brush (completely invaluable when cleaning inner rims)
2 Chenille wash Mitts
Chemical Guys Wheel Gel ( 1 part water 1 part Wheel Gel used directly on surface)
Optimum Power Clean (1.5 oz of Power Clean used in bucket solution)
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1880.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1881.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1882.jpg
When rinsing wheels it is always safer to wash your wheels when they have cooled down. If you rinse a vehicle that has just been driven you risk the rotor warping because the rotor is hot while the water is cold. GTI was picked up the day before so the wheels were cool so there were no issues rinsing the wheels.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1883.jpg
Coating the caliper and wheel with Chemical Guys Wheel Gel.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1884.jpg
CG Wheel Gel also sprayed on tires.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1885.jpg
You can see the wheel gel working and pulling the dirt away from the tire. This will help the longevity and look of your favourite tire dressing by having a clean canvas to work on.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1887.jpg
Here is the Daytona brush in action. I scrub by brushing in side to side and back and forth motion to get the best cleaning action. Again I can’t emphasize how much it’s helped me keep my hands from getting tiny cuts from the rotors.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1888.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1889.jpg
The Daytona Brush bent and being used behind the spokes.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1890.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1891.jpg
The chenille mitt being used for the face of the rim. Although I prefer using the detail brush or zymol brush I find that the chenille mitt saves me some time because it has more coverage. I still use the detail brush for the corners of spokes.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1892.jpg
Detail brush being used for the lug nuts.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1893.jpg
All cleaned up.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1894.jpg
Whoops almost forgot the calipers. When cleaning your calipers or the inner rims if you find that it’s being blocked by a spoke or caliper just roll your vehicle backward or forward to clean the previously inaccessible area.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1895.jpg
Another example of a wheel scrub down.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1899.jpg
Clean and Clear bucket. Keep that in mind for after the wash.
Nikku
11-16-2009, 04:19 PM
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1900.jpg
1 ounce of ONR going in the bucket.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1901.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1903.jpg
1 ounce of Maxi Suds going into the bucket
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1905.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1907.jpg
2 ounces of Power clean going into the bucket.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1908.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1909.jpg
A quick blast of the hose and voila! A wonderful symphony of colours.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1910.jpg
GTI being rinsed down.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1911.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1912.jpg
2 bucket wash method being practiced. At the beginning of the process you have two clean sheepskin wash mitts in the suds bucket while the bucket with clean water remains untouched until the first pass with the mitt on the paintwork.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1913.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1914.jpg
Mitt doing it’s thing. Always start from the top of the car down that means, roof -> pillars -> hood -> trunk -> upper panels -> lower panels and bumper.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1915.jpg
Place your dirty mitt into the clean bucket. Give it a quick shake to loosen the dirt away from the mitt. The grit guard will do its job by keeping the dirt at the bottom.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1916.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1917.jpg
A mitt from the suds is now being used to clean. Repeat the process until the entire vehicle is done.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1918.jpg
Mitt from clean water bucket rung out and then placed into the suds. I made sure that the mitt I had just used on the panel did not come in contact with the mitt soaking in the clean water bucket. I remove and ring the mitt in the clean water bucket first and then transferred it into the suds bucket. Only then did I place the dirty mitt into the rinsing bucket.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1919.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1920.jpg
Dirty mitt from an extra dirty panel.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1921.jpg
Mitt being shook to loosen dirt.
POST WASH WALK THROUGH
Below is an assortment of scratches and oh so lovely rail dust. Did I ring my cousin’s neck for it? No Comment.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1922.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1923.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1924.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1925.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1926.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1927.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1928.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1929.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1930.jpg
Nikku
11-16-2009, 04:20 PM
DRYING
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1932.jpg
My trusty Makita was used to knock out hidden water areas in the gas tank, in between trim areas and tiny crevices that my hands would usually be unable to get to.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1933.jpg
For the rest of the vehicle 3 waffle weave drying towels were used. You can get away with two but I find using three much more efficient. I don’t like wet towels. In terms of the quality of the waffle weave, nothing but the best should touch your paint. The last thing I am sure anyone wants is for their products used for cleaning to induce marring in the paint.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1934.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1935.jpg
Before I forget a shot of the water after washing the GTI.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1937.jpg
Moving onto claying. I used Riccardo Yellow and clay lube which was a mix of OPT Quick
Instant Detailer and ONR. I find using QID alone with clay lube causes hazing on the paint. Easily preventable if you dry each panel as you clay rather than leaving it to haze. I chose to use ONR with QID just because I feel the clay glides a little more with the ONR mixed in.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1938.jpg
The Riccardo clay is rolled into a ball and then flattened out.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1941.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1942.jpg
Here I am claying the GTI. I find when claying I use the up and down and side to side motion. I have had some clients when claying ask me why the clay at first seems to start removing a certain contaminant then kind of stops working and usually more often than not it’s because they were only claying in one direction rather than in the up and down and side to side motions.
So if you notice that a contaminant is not coming be sure to do both motions and if that doesn’t work bump the clays aggressiveness up but be aware than you will probably need to follow up with a polish to get rid of the light marring left by the clay.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1943.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1944.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1945.jpg
Drying the hood with a waffle weave after claying.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1946.jpg
When you notice the clay is starting to get loaded(dirty). Fold and flatten the clay back out and voila you have new clay. However if you drop the clay at anytime just throw the clay out. It isn’t worth saving that extra little bit because dirt in the clay will end up scratching your car and that just isn’t worth it.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1947.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1948.jpg
PAINT MEASUREMENT
Now on to measuring the paint thickness of the paint. The Defelsko 6000 was used to measure the paint. The paint on the GTI was relatively healthy except for the roof where you’ll see from the pictures it hit 78 microns. This area will be discussed when I start polishing.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1951.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1954.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1955.jpg
POLISHING
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1958.jpg
My tools for polishing were 2 x Metabo PE12-175 polishers, 6” Sonus White Polishing Pads, 4” Flat LC polishing pads, 3M Sun Gun, 3M Backing Plate, Rubbish Boys Backing Plate, Meguiars 105, Meguiars 205 and Menzerna 106FF.
For most of the car except the roof Meguiars 105 was used with the 6” and 4” pads. M205 with 6” and 4” was used on the roof.
Polishing Steps
900 rpm light pressure – medium pressure
1100 rpm heavy pressure
900 rpm medium pressure - light pressure
When I neared the end of a pass there was almost no pressure on the pad. I lifted the rotary to make sure my arms were sustaining most of the rotaries weight. By doing this the finish that was attained in my opinion was almost LSP ready. I then followed up M105 with M205 with the same process except that I kept the RPMS at 900rpm the entire time.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1959.jpg
I love how thick the Sonus pads are. Too bad they have been discontinued.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1960.jpg
I apologize for the blurry pics. It’s hard to take pictures on your own thankfully on the second day my gf came by and helped towards the end of the detail.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1963.jpg
Door ding.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1965.jpg
After 3 passes with M105 on 4 inch pad. I could have used a more aggressive pad or even wet sanding but I didn’t think it was necessary to take it to a more aggressive level when I felt that the results were more than satisfactory.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1966.jpg
The result.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1967.jpg
Remember the scratch and paint transfer on the side mirror? Gone.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1968.jpg
Sorry defects were a little hard to take on the white. However in this particularly picture you’ll notice the 3M sun guns reflection is a little hazy and trust me there was quite a bit of swirls.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1969.jpg
Haziness and swirls gone.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1970.jpg
Cleaned up.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1971.jpg
Cleaned up.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1972.jpg
Cleaned up.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1973.jpg
Nikku
11-16-2009, 04:21 PM
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1974.jpg
Here I am correcting the bumper. Yes I love my shorts and my crocs. Those aren’t my socks I swear.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1975.jpg
I will be using a 4 inch LC pad with M105 on the bumper lip area. This area needed about 3 passes.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1976.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1977.jpg
Here I am taping off the rubber near the bumper lip area. Even though I am working at such low RPM’s its just good practice to tape. When using a rotary or even a DA the corners of the pad can burn subsequent perpendicular areas. Be aware and you are better safe than sorry so make sure you tape off.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1978.jpg
Polishing away. If you look closely the pad is not touching the increased grade of the paint where the paint meets the trunk.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1979.jpg
Now to the hatch. I propped the hatch open with a microfiber towel placed on the bumper while using a polishing bottle to prop it up. It gives me better access to the paintwork in that particular area.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1980.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1981.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1982.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1984.jpg
Emblem before.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_19841.jpg
Emblem after with cuetip with m105 then cuetip with m205.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1985.jpg
Hazzy and Swirly.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1986.jpg
Cleaned up.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1987.jpg
Cleaned up.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1988.jpg
Yes that’s me shining a 3M sun gun on my head. No I’m not trying to get a tan and yes I was just playing around. Life isn’t fun without silliness.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1992.jpg
Closing out day one. I removed the tape that was used to protect the lower plastic trip as I was polishing the lower panels. Tape used. Two balls.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1993.jpg
In the middle of day two refining the paint with M205 on Sonus white and checking my work.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1994.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1995.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1996.jpg
Here I am using a MF towel to brace myself so my clothes do not come in contact with the surface of the paint. I am a heavy boy but that isn’t my belly that’s my sweater.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1997.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_1998.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2001.jpg
Priming a pad with M205.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2002.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2003.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2004.jpg
That brings an end to polishing.
Nikku
11-16-2009, 04:23 PM
POST POLISHING RINSE
The wash is to just remove any powder left on the car. Most of the polishing dust was removed via air compressor.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2005.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2006.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2007.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2008.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2009.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2010.jpg
PRE-LSP
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2011.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2012.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2013.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2014.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2015.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2016.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2017.jpg
303 Aerospace Protectant was used on all the exterior trim.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2018.jpg
I find that spraying product onto the MF and then wiping the applied area provides for a more uniform look. I’ve noticed when product is applied directly you have streaking issues.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2019.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2020.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2021.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2022.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2023.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2024.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2025.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2026.jpg
My girlfriend giving the interior a quick wipe down with Einszett Cockpit Premium.
LSP APPLICATION
LSP: Migliore Primo
My take on Primo. I applied primo by using an applicator pad and I would work two panels at a time then buff off. I found Migliore fairly hard to remove. Once I thought that I had buffed off all of the wax there would still be obvious streaking. I resorted to using quick detailer to help with the initial buffing and then would follow up with a clean MF . It also helps to have a lot of microfiber towels on hand. Look at the pictures and you be the judge. So do the ends justify the means? I like the product even though it may take me longer than usual to remove it. It looks great. I’ll give it a few more tries before I have a solid answer.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2028.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2029.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2030.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2031.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2032.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2033.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2034.jpg
Notice the hazing near the halogens. Clarity isn’t perfect because there was still wax there. On to more buffing.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2035.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2037.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2038.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2039.jpg
Nikku
11-16-2009, 04:25 PM
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2041.jpg
Loving the deep and wet look.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2042.jpg
On to the rest of the car.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2043.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2044.jpg
Defying gravity. Definitely hard to get off. :doh:
AFTERS
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2045.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2046.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2047.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2048.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2049.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2050.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2054.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2055.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2056.jpg
Outdoor Photo Session
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2057.jpg
Buffing off a little more wax.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2058.jpg
VOILA!
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2059.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2062.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2063.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2064.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2065.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2066.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2069.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2071.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2074.jpg
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2075.jpg
Putting on another layer of Tropicare White Pearl Dressing on the Tire. 2 coats were applied. One after polishing and one after LSP.
http://i573.photobucket.com/albums/ss172/nickowl/VW%20GTI/DSC_2079.jpg
RainX being applied to the windows.
Exhaust tips were treated with OPT Metal Polish 0000 Steel Wool. OPT MP with MF.
VW GTI: $27,000
Cost of lunch for GF? Too Much
Grateful Cousin? Priceless
Detail Hours: 15 hrs
Camera Work: 2 Hours
jeteast99
11-16-2009, 08:14 PM
WOW! That is a lot of pictures
imported_DJ Mayo
11-16-2009, 08:19 PM
Sick job man!!!
Leadfootluke
11-16-2009, 08:46 PM
VERY nice writeup. The steps were much appreciated
Thomas Dekany
11-16-2009, 08:57 PM
Lovely detail and car!!! :2thumbs::2thumbs::2thumbs::2thumbs:
RaskyR1
11-16-2009, 09:08 PM
Awesome work bro! Great pics, and a top notch write up! :2thumbs:
MarcHarris
11-16-2009, 09:10 PM
wonderful in-depth write-up and great pic`s!
carmine1149
11-16-2009, 09:26 PM
I always considered white a color that would never look anything better than "clean". This car certainly throws my theory out the window. Outstanding job - looks great...Carmine
mystickid
11-16-2009, 10:02 PM
Exteremely well written and laid out Nick!
Superb Detail too!!
Side Note, But How do you upload all those pics on one thread with correct spacing and wording in between?
Nikku
11-17-2009, 06:52 PM
WOW! That is a lot of pictures
Yes it is :) but i hope you enjoyed it !
Sick job man!!!
Thanks ! and thanks for reading it :)
VERY nice writeup. The steps were much appreciated
The pleasure was all mine. Thanks for reading it.
Lovely detail and car!!! :2thumbs::2thumbs::2thumbs::2thumbs:
Thanks tdekany !!! How are things with you? Business treating you well?
Awesome work bro! Great pics, and a top notch write up! :2thumbs:
Thanks Rasky ! Appreciated the kind words for sure and by the work you`ve been putting out I am honoured by the compliment.
wonderful in-depth write-up and great pic`s!
Thanks MuttGrunt. I am trying to do my best but I definitely get a lot of joy from writing and taking pictures. Pictures just sometimes aren`t in the cards when detailing when time is a factor.
Hope business is well with you too :)