Barry Theal
11-13-2009, 08:01 PM
Hello everyone. Hope all is well. I been real busy as of late and got a lot of things going and I thought I would share a new product I`ve been using. The product is called Finish-it and its manufactured by a company called HiLustre. HiLustre is a company based out of California, IMHO they are gonna be a big competitor in the market of detailing products. Anyway I had a real close friend of mine just get a Tahoe fully repainted it and ask me to fix the painters mistakes. I have been using Finish-it on several test panels for a few days and thought I would share some results with you. This product is a water based Non- Dimishing product. All I can say so far is wow!!!!!!!!!! Here are some of the results I was able to produce. This paint has no depth and is a real ****** job. Orange peel is bad. There is no clarity at all.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/5144f355.jpg
I first dry sanded the masked off area with 3m trizact 1500 and then wetsanded it with Norton 3000. Both were done By a D/A.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/23b524a2.jpg
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/19a58ae2.jpg
Here is what it looked like sand flat.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/b17ef61d.jpg
Once sanded I used Finish-it on a Wool pad and rotory, and then I finished down with a dual action polisher and a orange foam pad. With two steps I went from flatly sanded paint to LSP ready paint. These pictures results are after 3 ipa wipedowns.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/ca9c6693.jpg
Here is a camera flash on the sanded side.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/b9ee453c.jpg
Here is a camera flashes on the finished side.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/94c8f762.jpg
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/7f43e070.jpg
Here is a reflection shot with no flash to show some depth and clarity. After looking at this picture you can tell I`m married with kids lol. Boy my face is get chubby. :lol
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/bba4f058.jpg
Anyway guys ill keep you updated as I go. I`ll be doing this vehicle over the weekend. ILl get some really good shots for ya. As of now this product is gonna be my new goto product!
Barry
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/5144f355.jpg
I first dry sanded the masked off area with 3m trizact 1500 and then wetsanded it with Norton 3000. Both were done By a D/A.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/23b524a2.jpg
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/19a58ae2.jpg
Here is what it looked like sand flat.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/b17ef61d.jpg
Once sanded I used Finish-it on a Wool pad and rotory, and then I finished down with a dual action polisher and a orange foam pad. With two steps I went from flatly sanded paint to LSP ready paint. These pictures results are after 3 ipa wipedowns.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/ca9c6693.jpg
Here is a camera flash on the sanded side.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/b9ee453c.jpg
Here is a camera flashes on the finished side.
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/94c8f762.jpg
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/7f43e070.jpg
Here is a reflection shot with no flash to show some depth and clarity. After looking at this picture you can tell I`m married with kids lol. Boy my face is get chubby. :lol
http://i484.photobucket.com/albums/rr202/barrytheal/hi%20lustre/bba4f058.jpg
Anyway guys ill keep you updated as I go. I`ll be doing this vehicle over the weekend. ILl get some really good shots for ya. As of now this product is gonna be my new goto product!
Barry