Winter Prep: Big, Blacked-Out, and Bad *** Jeep Wrangler + AutoLavish

[MarcHarris]

The owner of this 2007 4-Door Wrangler was referred to us by a future client, with the goal was to put on some good protection in prep for winter. Of course if possible, we wanted to make it look better in the process.





When we arrived, the Jeep looked intimidating. We already expected to have to scrub down the undersides, and brought a few extra bottles of APC, Degreaser, and C.G. Barebones (basically the same stuff as ASD with less smell). The finish was heavily swirled and had significant RIDS (off-roading has a way of doing this!). Since it is a Jeep, and it is about to be put through winter, we advised going with a full 2 or 3 step correction come Spring, with a 1-step for the time being. A One Step would really liven up the color while making the Jeep look great, and would fit within the client`s original budget better. We will get into this later.





Here I am, ready to tackle the Jeep:



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04307.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04310.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04311.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04312.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04318.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04316.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04320.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04314.jpg





Undersides:



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04321.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04323.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04326.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04327.jpg





We started by cleaning the undersides using Meg`s Degreaser at 4:1 and APC at 4:1 sprayed liberally everywhere we could aim at followed by the black SchMITT and various brushes.



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04336.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04337.jpg





As I was crawling under the Jeep, Jacob took care of the wheels. We used C.G. Sticky Wheel Gel at 3:1 and the Daytona Brushes, with APC 4:1 for the tires. One half of one of the front tires was getting hit by direct sunlight while we washed the wheels, and the APC left streak marks no matter how fast we rinsed off the grime. So advice: never use APC on tires that have been heavily dressed before, and never use APC on anything in the sun. The temps on the paint in the sun were 130+F on a 55 F day with the vehicle in the sun for about 10 minutes. We did not check the temps on the tires, and, well, had to work that tire extra hard the rest of the day. We used Griots Rubber Cleaner (and shade) with good results.





After rinsing off the degreasers and wheel cleaners, we foamed the undersides to help neutralize anything left. Shampoo in this case was C.G. Citrus Wash and Clear at about 3:1 dilution in the Foam Cannon.



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04339.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04340.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04341.jpg





...and continued to foam the rest of the vehicle for the first time to loosen the heavy soil:



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04346.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04349.jpg





...and rinsed:



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04351.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04355.jpg





The Jeep was dryed with the Leaf Blower and a few drying-dedicated waffle-weave MF towels, then taped up for polishing.



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04356.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04357.jpg





As mentioned earlier, the finish was in rough shape. Got Swirls?:



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04313.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04315.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04334.jpg

[MarcHarris]

So we split up a section of the hood to sample some methods and see what would give the best bang for the buck. On the right side of the picture, we have 3M Ultrafina and pad via rotary. On the left side we have Meg`s M105 + 3M Ultrafina (could use an intermediate step with M205). The left looks better, but the right side looked really good too for a quick one-stepper! We showed this to the owner. He was stoked by both corrections, but going with a Multi-Step polishing would have doubled the time and cost of the detail (some wet sanding was needed as well). As it looked, we would be able to hook up this Jeep, make it look amazing, spend more time with sealants, and still come out just under his budget. We advised to wait for Spring to do the full monty: correct any issues that happen in Winter, and clean out the undersides to get all salt off the Jeep. The owner thanked us for our honesty and for not trying to rip him off ;)



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04362.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04363.jpg





We used both the Makita and the Flexcalibur with 3" and 5" black LLC pads and the 7" Ultrafina pad. Backing plate was the Yellow Foam 3M Backing plate for the Makita 6 (or 7") backing plate for the Ultrafina pad. Polish was 3M Ultrafina only.





After polishing, we foamed the car one more and used the pressure washer to get rid of any polish residue in the crevices.



LSP was the winning combo from Danase: DWG under Danase Paint Sealant. If you like DWG, you will love the Paint Sealant. Super easy to apply and wipe off, super slick, super wet. We are very pleased with all the Danase products we have tried so far (DWG, DPS, Diamond Tire Gel). The DPS smells different that any sealant we have tried, kinda like toothpaste. Get a bottle and let us know what you think ;)



The underside was dressed with C.G. Barebones. This stuff is really good, and similar to Meg`s All Season Dressing. If anything, the barebones has a more pleasant smell, where the Meg`s ASD smells stronger for a longer period of time. I do not know about longevity comparisons, that will have to wait until I can wash The AutoLavish Detail Rig (done half in ASD and half in Barebones). Tires were dressed with Black Magic Matte Tire Shine, provided by the owner. I love how this stuff looks on big wheels. With nice shiny wheels you do not want the tire shine to take away from the look, but tires this big need to be dressed as it is hard to achieve an even look without proper dressing.



The owner was extremely impressed and kept moving around, watching the various reflections:



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04370.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04374.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04375.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04376.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04377.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04381.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04383.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04378.jpg



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04388.jpg





Bug catcher:



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04389.jpg





What are these guys looking at?



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04392.jpg







Oh! Oh, I see now... killer reflections from a simple one-step



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04394.jpg





I would rock this Jeep anyday!



http://i485.photobucket.com/albums/rr220/jacobbunyan/2007%20Jeep%20Wrangler%204-Door%20Detail/DSC04373.jpg

[ocd dave]

I`m personally not a fan of the new jeeps but I am a big fan of that shine job:2thumbs:



good work fellas!!!!

[Alex Boyce]

Looks great, I`ve got a 2 door one lined up that`s just like that.



Like usual good work!

[Deep Gloss Auto Salon]

I am shocked :shocked: at the level of correction you got with UF and UF pad... looks great

[N8Dogg98]

That looks great, nice turn around

[2Great2Exist]

cool car and nice work ;)

silver pick up look awesome :bow

[ten39]

Great job!



I`ve never done a Jeep, but I can`t imagine with all of their gaps, nooks, and exposed hardware that they`re a fun undertaking... much less a black one.

[imported_DJ Mayo]

Looks awesome man! you ever tried Menzerna Power Finish 203? If not, I highly recommend it. You can get great correction and finish down excellent, making it perfect for one steps. Another great job and attention to detail by you guys.

[Barry Theal]

nice work you two crazy guys!!!!! Looks awesome.

[imported_d00t]

Great work to both of you guys!

[MarcHarris]

I`m personally not a fan of the new jeeps but I am a big fan of that shine job:2thumbs:

good work fellas!!!!



Thanks you




Looks great, I`ve got a 2 door one lined up that`s just like that.

Like usual good work!



Thanks a lot - I`m sure a guy like you will really knock that bad boy out




I am shocked :shocked: at the level of correction you got with UF and UF pad... looks great



Thanx bro. We were kind of too. I`d say 70% with just that. We were going to go something more aggressive, but it wouldn`t finish out right. If we went with DAs - it would have taken longer to break down polish.




That looks great, nice turn around



Thanx Nate!




cool car and nice work ;)

silver pick up look awesome :bow



Thanks - that`s the autoLavish detail rig currently wearing Opti-seal and Z-CS side by side for comparison purposes ;)




Great job!

I`ve never done a Jeep, but I can`t imagine with all of their gaps, nooks, and exposed hardware that they`re a fun undertaking... much less a black one.



Very much so, but it made for some nice afters




Looks awesome man! you ever tried Menzerna Power Finish 203? If not, I highly recommend it. You can get great correction and finish down excellent, making it perfect for one steps. Another great job and attention to detail by you guys.



Thanks a lot. We have it as well, but it wouldn`t finish down completely hologram free. If we went with PCs to use something it would take longer to break polish down. The polishing itself this way only took about 90 minutes which saved the client some loot :)




nice work you two crazy guys!!!!! Looks awesome.



As always, we appreciate it Barry




Great work to both of you guys!



Thanks a lot Aaron and I look forward to your next post too

[CivicBeater]

talk about orange peel!



Nice correction.

[RustyBumper]

WOW!! Awesome turn around guys. That Jeep looks sick!! Out of curiosity, do you know what kind of wheels those were?

[imported_artikxscout]

Spectacular!