Swirls in clear bra...How to remove?

[asharma]

Plexus? PCXP, white pad, 205? What works without melting the clear bra? thx in advance...

[uzj100]

FWIW, I use Menz 106FA with a white pad via Metabo rotary, low rpms, very little pressure and keep the machine moving--a bit faster than you would move it on paint.



I think this would be a good combo via PC as well. Believe I just saw a "click and brag" on here and 205 was used via PC to work on rear stone guards of a Porsche.



My goal on the clear bra is improvement rather than perfection. :lol



HTH

[Carticular]

I`ve used M205 and ZPC with a PC on an LC white polishing pad. ZPC gave me better results but M205 does work, but probably on a finishing pad rather than a polishing pad.

[JohnKleven]

Swirls in film can be very difficult. Sometimes not correctable.





John

[Jason M]

I`ve had the best luck with M205 and a foam hand pad. I have used a finishing pad and M205 in the past but prefer the safety of working by hand on film.

[imported_JoshVette]

I wouldn`t use a white pad on them, I`ve had great success many times with a rotary, black pad and some Menz FPII with low rpms and faster movements. Just don`t let it heat up much.



Not always 100% either, but good enough to look greatly improved.



Josh