Ack
07-13-2009, 02:25 PM
I just got my products in the mail and I`m ready to get started. I`m cleaning and waxing my new silver 2010 Toyota Tundra. It`s pretty clean, but not perfect since I had to drive it around for a few days while waiting for my order to come in. I`ll be doing everything by hand, I don`t have a buffer.
I`m very new at all this and could use all the help and advice I can get. Here`s the process I plan to use. Any comments or suggestions are appreciated:
--Hose off the entire truck, wash with Meguiars gold car soap using lambs wool mitt and 2-bucket method with grit guards. Hose off soap and dry with microfiber towels.
--Apply Klasse AIO using Wolfgang Polishing Pal white pad ( Wolfgang Polishin’ Pal is an ergonomically shaped urethane handle that holds specially designed foam pads using hooks & loops. ), wipe off AIO with MF towel immediately after applying (wipe it off as I go, not allowing it any time to dry or set in).
--Immediately after Klasse AIO, apply Collinite 845 using Wolfgang Polishing Pal red pad (see link above), buffing off immediately with a MF towel as I apply (wipe it off as I go, not allowing it any time to dry).
--Let the Collinite cure for at least an hour, possibly overnight if it`s getting too late, then apply a 2nd coat of Collinite 845.
So, that`s my planned process and any suggestions or changes would be great.
I also have a few more specific questions:
--Is it ok to apply the Klasse AIO and Collinite when the temperature outside is 90+ degrees as long as the truck is in the shade and the metal is warm but not hot to the touch?
--Should I apply the Klasse AIO and Collinite to all of the following: Windshield, windows, chrome, headlights and tail lights, aluminum wheels, black plastic door handles and other trim? Is there anything in that list that I should NOT apply the AIO or Collinite to?
Thanks!
I`m very new at all this and could use all the help and advice I can get. Here`s the process I plan to use. Any comments or suggestions are appreciated:
--Hose off the entire truck, wash with Meguiars gold car soap using lambs wool mitt and 2-bucket method with grit guards. Hose off soap and dry with microfiber towels.
--Apply Klasse AIO using Wolfgang Polishing Pal white pad ( Wolfgang Polishin’ Pal is an ergonomically shaped urethane handle that holds specially designed foam pads using hooks & loops. ), wipe off AIO with MF towel immediately after applying (wipe it off as I go, not allowing it any time to dry or set in).
--Immediately after Klasse AIO, apply Collinite 845 using Wolfgang Polishing Pal red pad (see link above), buffing off immediately with a MF towel as I apply (wipe it off as I go, not allowing it any time to dry).
--Let the Collinite cure for at least an hour, possibly overnight if it`s getting too late, then apply a 2nd coat of Collinite 845.
So, that`s my planned process and any suggestions or changes would be great.
I also have a few more specific questions:
--Is it ok to apply the Klasse AIO and Collinite when the temperature outside is 90+ degrees as long as the truck is in the shade and the metal is warm but not hot to the touch?
--Should I apply the Klasse AIO and Collinite to all of the following: Windshield, windows, chrome, headlights and tail lights, aluminum wheels, black plastic door handles and other trim? Is there anything in that list that I should NOT apply the AIO or Collinite to?
Thanks!