View Full Version : How to deal with this~!
Dragons4life
07-08-2009, 07:11 PM
http://i57.photobucket.com/albums/g224/SilentBreeze850/20090708428.jpg
any ideas? its has been there for awhile, and now since i`m learning things around here might as well ask how to properly remove it.
By hand prefered...
Setec Astronomy
07-08-2009, 07:44 PM
You just need to get it CLEAN first and then go at it with your Polishin` Pal with orange pad and SSR2. Follow up with a less agressive pad/polish combo if ya got it. Probably won`t come out 100% but it will be improved.
Dragons4life
07-08-2009, 07:46 PM
when you improved as in..not that noticeable?..and i if wanted to get rid of it what will i need?
Setec Astronomy
07-08-2009, 07:51 PM
It`s pretty hard to tell from the picture...sometimes you can polish something like that so that it`s undetectable, sometimes not. Usually there are some RIDS embedded in the scuff that will be left. That doesn`t look that bad, but it`s dirty and not all of the scuff is in focus.
Just do it already and see how it comes out! You can`t make it any worse (well, you can, but you`ll be good, won`t you? Clean it good first and just SSR2, no Turtle Wax rubbing compound, ok?)
Dragons4life
07-08-2009, 08:23 PM
hahah ok will give it ago.
BigJimZ28
07-08-2009, 08:30 PM
yea hard to tell from the pic but it might just be some paint transfer
I would wash it the try a solvent (WD-40 might even work)
if that does not work then polish as above
BigAl3
07-08-2009, 09:44 PM
also try claying before polishing it...
AGAuto
07-08-2009, 09:52 PM
I can`t really tell from the picture, but I think you might be able to get it out. After cleaning it, try using a cleaner wax and some elbow grease to remove it...might take some effort but it may just do the trick. However, I may be wrong about this but I can`t really tell by the picture
Dragons4life
07-09-2009, 08:30 AM
what more do u need from the picture? ..do you want the full shot or a close up of it?
89gt-stanger
07-09-2009, 12:44 PM
what more do u need from the picture? ..do you want the full shot or a close up of it?
Yes. A close up would help.
Dragons4life
07-09-2009, 02:26 PM
Yes. A close up would help.
lhmm i will get my camera then....this was from my phone so yeah...
jopa489
07-09-2009, 02:45 PM
I`m guessing most of that will come out completely - it looks like paint transfer. The only part that may require extra attention is where you ran your fingers (it looks deeper there?).
Dragons4life
07-09-2009, 08:41 PM
i`m waiting for my stuff from autogeek...i`ll start the entire process when i have time lol. this going to be like a 6-7 hour project..maybe more.
And guys whats the usua wait time for each layer..eg. polish-sealant-wax etc...i know from sealand to wax is like a 12hour curing time.
jopa489
07-09-2009, 09:40 PM
Sealant is really the only thing that needs to cure.
Dragons4life
07-10-2009, 08:55 PM
thats what i thought....but i will give a little time in between the other products..