PorscheRacer
06-18-2009, 12:57 PM
I polished my Jerez Black M3 over the weekend using a G110 with Menz IP on an orange LC pad followed by FP on a gray pad. The results are excellent but I did have some questions. This was my first time using a machine polisher.
The IP seemed dry out quickly and dust a lot. It seemed to take much less time than on the videos I`ve seen. I thought maybe I was using too little polish but more didn`t seem to help at all. It still worked well but is it normal to dry out very quickly? I`m talking maybe two or three passes with the DA before the IP was dry.
The FP on the gray pad seemed to work much more like the videos I`ve watched.
Both pads were 5.5" CCS pads.
Thanks!
The IP seemed dry out quickly and dust a lot. It seemed to take much less time than on the videos I`ve seen. I thought maybe I was using too little polish but more didn`t seem to help at all. It still worked well but is it normal to dry out very quickly? I`m talking maybe two or three passes with the DA before the IP was dry.
The FP on the gray pad seemed to work much more like the videos I`ve watched.
Both pads were 5.5" CCS pads.
Thanks!