View Full Version : What speed?
GS4_Fiend
06-17-2009, 11:00 AM
Product is Menzerna P085RD. Machine is PC. I was wondering what speed or speeds do you guys use to get it to burnish up the paint on a finessing pad. Thanks.
simplybao
06-17-2009, 11:03 AM
I used 5 on every pad that I used and I still got good results. The PC is pretty tame and 5 is still not bad.
Thats Fresh
06-17-2009, 12:21 PM
i start at 3 and the final pass at 1 using the PC.
(LC blue pad)
GS4_Fiend
06-17-2009, 01:50 PM
What I do is spread, set it to 3, then to 5. Does that sound ok?
GS4_Fiend
06-18-2009, 03:43 PM
bump .
GS4_Fiend
06-22-2009, 05:58 PM
Anyone? .
snowskate
06-22-2009, 06:10 PM
I spread at 2-3. Work at 5.
Legacy
06-22-2009, 06:17 PM
i start at 3 and the final pass at 1 using the PC.
(LC blue pad)Are we talking about jeweling or waxing? Speed 3 on a PC won`t cut the mustard.
GS4_Fiend
06-22-2009, 09:34 PM
And I thought I was doing it wrong. So spreading it on 3 and go 5 is correct. That`s good. Thanks guys for your help.