danman589019
05-11-2009, 04:21 PM
Hi, I have a couple questions for anyone who can offer advice. I will be working on a new Mazda 3 with Velocity Red paint. Being new, it`s in good condition but there is minor swirls I would like to improve if I can. I don`t have a DA, but here`s what I do have as far as polishing/swirl removal goes:
Polishin` Pal (http://www.autogeek.net/polishing-pal.html)with orange, white, and red pads
P21S Paintwork Cleanser
KAIO
Now for the second question. After I wash (ONR), clay, and do some type of polish/clean with the above as recommended by you autopians. What would be a good LSP process with these products:
Opti-Seal
OCW
Collinite 476s
Poorboy`s Natty Paste Wax
I was thinking doing wash, clay, KAIO, Opti-Seal, Collinite. Sound good? What would you recommend I change about that? Also, I`m using the Collinite because I want nice long-term protection. Is there a protect I could put on top of that to boost shine periodically, like my OCW, or would I just be better doing another layer of Collinite?
Thanks for any help
Polishin` Pal (http://www.autogeek.net/polishing-pal.html)with orange, white, and red pads
P21S Paintwork Cleanser
KAIO
Now for the second question. After I wash (ONR), clay, and do some type of polish/clean with the above as recommended by you autopians. What would be a good LSP process with these products:
Opti-Seal
OCW
Collinite 476s
Poorboy`s Natty Paste Wax
I was thinking doing wash, clay, KAIO, Opti-Seal, Collinite. Sound good? What would you recommend I change about that? Also, I`m using the Collinite because I want nice long-term protection. Is there a protect I could put on top of that to boost shine periodically, like my OCW, or would I just be better doing another layer of Collinite?
Thanks for any help