Help for choosing the right polish to use with rotary buffer

[Rickymx]

Hello,



I`ve got a krauss rotary buffer, it`s not a professional one but works well, with 6 speed etc etc

I also have a lot of pads, some flat and some wave

i need to correct a black vw touareg that i think have a really hard paint, it has only swirls and some hologram not deep scratches so i need something to finish it up!



wich polish would you recommend? and also to use with flat or wave pads?

I was thinking to buy M205 from elite car care, do you know some better shop in europe for car detailing?



thank you!!!:up



p.s. i`d like to post photos but if i do, i have problems because i`m still under 10 posts

[flash gordon]

Hello,



I`ve got a krauss rotary buffer, it`s not a professional one but works well, with 6 speed etc etc

I also have a lot of pads, some flat and some wave

i need to correct a black vw touareg that i think have a really hard paint, it has only swirls and some hologram not deep scratches so i need something to finish it up!



wich polish would you recommend? and also to use with flat or wave pads?

I was thinking to buy M205 from elite car care, do you know some better shop in europe for car detailing?



thank you!!!:up



p.s. i`d like to post photos but if i do, i have problems because i`m still under 10 posts



Megs 105/205 topped with uf(seems to be tha flavor of tha month) As far as 10 post....Just respond 4 more times with something like:looks great,oh really,welcome to Autopia,or thx 4 tha response.and you will hit your mark:nana:

[Rickymx]

with uf you mean ultrafina?

maybe i could use all by 3m? is easier for me to find them, in italy!

[flash gordon]

with uf you mean ultrafina?

maybe i could use all by 3m? is easier for me to find them, in italy!



yes ultra fine. as far as using all 3m...I personally like 3m products but good luck gettin them to sale you Meguiars....I can`t recall who own`s Meg`s now but i`m thinking it is Dupont....may be wrong though

[SuperBee364]

3M bought Meguiars. :(

[Rickymx]

No, i mean that here the 3m line is available and i can found it in a professional shop but meguiars (pro line) is not available at all. I should buy it from UK(maybe is cheaper)

can you tell me wich products of 3m i need to replace m105/m205? so i can check wich way is the cheapest! thanks!

[Rickymx]

These are the pics of swirl/holograms, are a bit large!



http://img190.imagevenue.com/img.php?image=69364_DSC_0050_122_888lo.JPG

http://img120.imagevenue.com/img.php?image=69372_DSC_0051_122_483lo.JPG

[Rickymx]

Can someone tell me what i need to correct this paint?

[Thomas Dekany]

your links pull up porn after you close the page, you may want to fix that.



the # here in the states is 06060 to compound. Any medium polish will do before Ultra fina, but you can use the whole 3M system as well. The numbers maybe different in Italy.

[Rickymx]

Ok, i ve got some news:



this was the point of start

http://i40.tinypic.com/29pym1g.jpg

http://i41.tinypic.com/2po19g2.jpg



today i did 2 light passes with a fine polishing pad and 3M FAST CUT COMPOUND(my paint man give me a little to try), i thought it was too heavy but...these are the afters:



http://www.dvcar.net/images/3m09374.png

http://i41.tinypic.com/23u26j5.jpg

http://i43.tinypic.com/34rg7es.jpg



There are only light swirls (i think because it was not enough dark outside)

It seems to be ready to be finished with ultrafina, and it seems that this paint is hard, isn`t it?

So what should i do? buy a bottle of fast cut compound and do a first pass of that on the entire car? should i get something lighter? Remaining in the 3m line, that i can found easily!



this is the other side, is dirty but the swirls are visible...all the car is in this conditions.



http://i43.tinypic.com/2lk7020.jpg



thanks!:xyxthumbs

[Rickymx]

I did a wipe with alcool and now it shows a lot of holograms, it seems that this fast cut has lot or fillers?