PDA

View Full Version : What to use to remove Ultima TTGP



imported_RedlineIRL
04-17-2009, 11:41 PM
On some of my exterior plastic trim I used Ultima Tire and Trim Gurad Plus. It has been on for a little while now but I can see dull streaks from the direction in which I wiped it. I guess is showing that I used too much. What can I use to remove this stuff and start all over and no bleach out or discolor the plastic trim?

Legacy
04-18-2009, 12:14 AM
On some of my exterior plastic trim I used Ultima Tire and Trim Gurad Plus. It has been on for a little while now but I can see dull streaks from the direction in which I wiped it. I guess is showing that I used too much. What can I use to remove this stuff and start all over and no bleach out or discolor the plastic trim?

Just use any APC cut accordingly. If it discolors a little it won`t matter cause the UTTGP should get it back to glossy black.

wannafbody
04-18-2009, 06:46 AM
3m wax remover might work. It`s paint safe but I`d try a test spot on plastic or rubber first.