Question about Meguiars D151

[kopimon]

Consider this standard correction process:



wash, clay

paint cleaner (KAIO, DG105, P21s, etc)

swirl removal (Menz SIP)

finishing polish (Menz 106FF)



I know the D151 can be used in both swirl removal and finishing polish steps (depending on which pad), but does it also act as a paint cleaner? If I use it, does it cover both paint cleaning and swirl removal steps in one pass?

[the other pc]

In Meguiar’s terminology paint cleaning and swirl removing are the same step.



And as long as that cleaner leaves an LSP-ready finish (rather than leaving slight marring that would need to be removed by a finer polishing step) there is no need for another defect correcting step. You can go straight to your LSP or apply a non-cutting glaze (which Meguiar’s calls a “pure polish�) before your LSP.



Since D151 is an all-in-one cleaner/wax you don’t need a separate LSP either. You can leave it as-is, or top it off with your favorite LSP if you like.



So the process D151 was designed for is something like:



wash

clay

D151



That’s it, done.





pc.

[kopimon]

Awesome, thanks pc.