View Full Version : White camaro fine swirl marks
jclt12003
10-18-2005, 01:15 PM
Hey guys before winter i am going to detail my car one or two more times before i put it away for the winter. I was wondering if anyone would suggest using the Poor boys SSR1 or SSR2 now i`ll be putting it on by hand i really don`t trust myself yet with a buffer. I was thinking about getting if buffed locally by a body shop. Now the swirl marks are not that bad at all. I just want to get out as many as i can. I used scratch X last time and it worked pretty well. But i was wondering if the SSR1 or SSR2 would work better. Thanx
Jason
Beemerboy
10-18-2005, 01:32 PM
The SSR2.5 will cut pretty well but you are going to want to polish after that...the SSR1 acts kind of like a polish and SWR so most of the time you need not followup with polish...On white because its forgiving of swirls I would use the SSR1 and then followup with wax
jclt12003
10-18-2005, 01:54 PM
Would NXT be a good wax to seal it off with. Or not.
jclt12003
10-19-2005, 08:48 PM
would you use a paint cleaner after this then seal it. Like a poor boys polish and then natty blue. I am kinda new at this so i need some help thanx guys.
Jason
Beemerboy
10-20-2005, 10:06 AM
If you have pro-polish then after the SSR I would do that then seal, wait 24 hours for cure time then wax....if you want you can do straight to wax after the polishing stages its your choice
tsx2004
10-20-2005, 11:43 AM
for maximum protection, after you get done using SSR 2.5 and 1, i recommend topping the car with poorboys polish with carnuba(blue). wipe it off and then apply poorboys EX-P or EX. wait 24hrs and then apply poorboys nattys(blue). then put it away for the winter. good luck