View Full Version : Pad Cleanup: Sealants
Ackman70
03-11-2009, 06:43 PM
How are you guy cleaning your pads that have been used with sealants? I used a sealant for the first time and soon realized it`s not water soluble.
imported_Detailing Technology
03-11-2009, 06:48 PM
a few sprays of degreaser
SuperBee364
03-11-2009, 07:23 PM
Detailer`s Pride pad cleaning powder. Mix up a scoop with three gallons of water before you start detailing, then just chuck your used pads into the bucket as the day goes on. At the end of the day, squeeze them out, give em a quick rinse, then either allow them to air dry or chuck em in the clothes dryer.
Legacy
03-11-2009, 08:06 PM
Dawn Power Dissolver
imported_DetailDan
03-11-2009, 08:23 PM
DP pad cleaner or Megs APC+.
Junebug
03-12-2009, 05:36 AM
+ 1 on the "Dawn Power Dissolver"
a.k.a. Patrick
03-12-2009, 12:08 PM
Any OTC APC.........
dublifecrisis
03-12-2009, 12:33 PM
+3 on the Dawn PD-work the pad withmy fingers under hot water, spray with DPD, let sit for15 minutes, rinse well then throw in a warm/hot wash gentle cycle. extra rinse cycle. squeeze dry.
Eisen Hulk
03-12-2009, 12:58 PM
+4 for the Dawn PD.
Please remember to wear gloves when using it. It will F your hands up!
imported_Jakerooni
03-12-2009, 01:38 PM
A little Degreaser in my system2000 pad cleaner make them come back to new.