dehazing headlights

[redfarsi]

I didnt have any sand paper otherwise I would have tried to wetsand. I also got the new wool pad and I wanted to see how it compared to the yellow cutting pad plus I was bored. So I decided to dehaze one of these headlights. They are pretty bad.



This is what I did:

Cleaned them with stoner invisible glass.

Did a pass with menzerna power gloss/LC yellow pad, that didn`t give me such good results so I tried the purple wool pad with no pad conditioner( I didnt burn the headlights)

I did a pass with that then I did a pass with white LC + 106FF and I finished with Menzerna FTG.



Now there really is a huge difference but I haven`t completely cleared the headlight. I just did one because I want to wetsand the other one and see how they compare. If I wet sand the other one will I have better results and what type of grit should I try? 1500 followed by 2000 grit?



Also should I just wet sand the one I already did and re polish it for better results?

I have a lot of people that want me to clear their headlights but I`m trying to experiment with various methods to see what results I`d get before I try other people`s cars.



Here are pics of the process.

http://img23.imageshack.us/img23/9240/img1424t.jpg

http://img23.imageshack.us/img23/1659/img1426m.jpg

http://img27.imageshack.us/img27/8065/79771050.jpg

http://img15.imageshack.us/img15/5381/img1430k.jpg

http://img16.imageshack.us/img16/9123/img1440.jpg

[IMG]http://img18.imageshack.us/img18/2985/img1450.jpg

http://img9.imageshack.us/img9/6986/img1455c.jpg

http://img10.imageshack.us/img10/952/img1456m.jpg